DAYTEK M38 Producthandleiding - Pagina 3

Blader online of download pdf Producthandleiding voor {categorie_naam} DAYTEK M38. DAYTEK M38 12 pagina's. Mk2 rotary clotheslines

PREPARING THE SITE FOR YOUR ROTARY CLOTHESLINE

Preparing the ground socket

1. Make sure the selected installation position has a

minimum of 3 meters clearance on all sides from the

central location.

2. Excavate a hole 250mm in diameter x 600mm deep.

3. Back fill the hole with screenings (small crushed

rock) to 450mm from ground level. This is necessary

to drain rain water that enters via the socket.

4. Position the the ground socket inside the hole so

that it sits centrally and vertically. The bottom end of

the ground socket will rest on the screenings while the

top of the ground socket should reach the ground level.

Adjust the depth of the screenings as needed.

5. To retain the ground socket in the central position,

backfill with screenings to 425mm from ground level.

Ensure no rocks are inside the socket.

Positioning the main tube assembly

6. Position 3 stakes spaced at an

equal distance around the hole

approximately 1 meter out. Insert

the stakes at at angle approximatly

300mm into the ground.

7. Insert the main tube assembly

into the ground socket making

sure the pin is positioned into

one of the slots. Secure by

engaging the locking ring.

(See Fig. 1 – 4)

600

MINIMUM

3.0

METRES

250

DIAM

425

450

SLOT

SCREENINGS