Automatic Mirage M 801E Handmatig - Pagina 14

Blader online of download pdf Handmatig voor {categorie_naam} Automatic Mirage M 801E. Automatic Mirage M 801E 17 pagina's. Multi-zone digital amplifi er manual

Pagina afdrukken
Menu Navigation (Continued)
INTERNET TIME / TIME ZONE
FRI 9:33:06 PM
UTC - 4:00 (Daylight Savings Time)
GET TIME
FROM INTERNET
NTP Settings
Update the time and time zone
using an internet connection.
RESET
RESTORE
SYSTEM
DEFAULTS
REBOOT
System Reset
Restore your amplifi er to factory
defaults or reboot the amplifi er.
SOURCE SETTINGS
S1
S2
S3
S4
S5
S6
S7
S8
Source Settings Page
Select the Source to be adjusted, from S1-
S8. This opens the Source edit page.
RESTORE DEFAULTS
Are You Sure?
YES
NO
Restore Defaults Page
To restore the M-801e to factory
defaults select "Yes", or to return
to previous menu select "No".
Factory defaults will reset the zone allocations
back to 1 - 8. It clears all settings like Zone
Names, Source Names, Maximum Volume
Limits, Bass, Treble and Loudness etc.
14
S1
GAIN
1
2
3
.
A B C
D E F
4
5
6
G H I
J K L
M N O
7
8
9
P Q R S
T U V
W X Y Z
0
_
Source Settings Page (Continued)
A Source may be named, by using the phone
Keypad. The analog input gain can be adjusted
using the Gain slider or Up / Down buttons. Gain
is used to match the analog input levels to the
Digital sources. Some Analog sources have large
variation in output levels. The 0dB default setting
is suitable for connection to high output devices
like CD players, while the standard level (1Vrms)
is achieved by setting the gain to +6dB. The Gain
slider (and source button) will fl ash red if the gain
is set to high and distortion is detected. Select the
Back arrow to return to the System settings Page.
NETWORK SETTI NGS
DHCP
STATIC
IP Address:
192.168.001.010
Subnet Mask:
255.255.255.000
DNS Server:
192.168.001.254
Default Router
192.168.001.254
Mac Address
12.34.56.78.9A.BC
-
Network Settings Page
Network setting always defaults to DHCP.
The connected Ethernet router's allocated IP
address can be viewed. If for some reason
a Static IP is required the selection can be
made, and settings adjusted using the back
and forward arrow and plus minus keys.
Select the back arrow to return to
the System Settings page.
(Analog
Input)
0
+