GreatCo GBI-34 Installatie-instructies en gebruikshandleiding voor huiseigenaren - Pagina 9

Blader online of download pdf Installatie-instructies en gebruikshandleiding voor huiseigenaren voor {categorie_naam} GreatCo GBI-34. GreatCo GBI-34 11 pagina's. Gallery electric fireplaces
Ook voor GreatCo GBI-34: Installatie-instructies en gebruikshandleiding voor huiseigenaren (11 pagina's), Installatie-instructies en gebruikshandleiding voor huiseigenaren (10 pagina's)

1. Operating by Manual Button

NOTE!

The manual buttons on the fireplace unit do not operate all functions of this electric fireplace. Their

purpose is to control some basic function if the remote control is misplaced or damaged. Please use the remote

handset to carry out all functions.

Main power switch

The POWER switch supplies power to all of the functions of the fireplace. This switch must be in the "ON" position

for any of the functions including the remote to work.

Flame button

The fire has four flame effects, by pressing the flame effect button the unit will cycle through each effect.

Heater button

Press once turns 750W heater on. (Pilot lights illuminated ●○)

Press again turns 1500W heater on (Pilot lights illuminated ●●)

Press third time turns heater off. (Pilot lights illuminated ○○)

To Reset the Heater

Your heater includes a protection system that shuts off the heater if it overheats for any reason:

1) Turn unit to off.

2) Unplug unit, wait 5 minutes.

3) Plug in and turn on.

2. Operating by Remote Control

NOTE!

In order to protect the product from becoming too hot, there is 8s delay when turning on the heater; also there



is 8s delay when turning off the heater fan.

Make sure the batteries are installed properly in the remote control.



The effective range of the remote control is up to 4 meters or 13 feet.



Battery: This remote uses 2 AAA batteries.

FLAME

main power switch

flame button

HEATER

heater button