Automatic Solutions 603IBK Handleiding voor installatie-instructies - Pagina 9

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Automatic Solutions 603IBK. Automatic Solutions 603IBK 12 pagina's.

Pagina afdrukken

When the master code is forgotten....

1) Wire a push button (or replicate with wire link) across the Egress terminal and (-)GND.

2) Switch off power for 1 minute.

3) Switch ON power.

4) during the first 60 seconds, press the EG button once to enable the function.

5) Enter the following code..

The keypad should now be in programming mode, ready to accept new data. The master code will

need changed at this point to something memorable before proceeding.

Using the standard codes...

Once you have exited out of programming mode, simply enter the user code.

Using super user codes

The handset should be charged for 8 hours before use. It is recommended to give it at least 1

hour charge before range testing.

Ring Another Handset

Press

and the unit will

display HS1-5 depending on

how many handsets are coded.

Press

and

to select and

then OK to call that handset.

Voicemail

When a call is not answered

within 40 seconds, the visitor

can leave a message. Once

complete, the handset will

display the

symbol. The unit

can store up to 16 messages.

To listen to voicemail, press OK to play. If there are more than 1 message, press

select the message required and press OK to play.

P a g e

| 9

Using the keypad

Activate output 1

Activate output 2

Activate output 3

The Handset

Reception

indicator

ON/OFF

Charging

base

Power

LED

Change Ring Volume

Battery

Press

Level

and decrease ring volume

12.21

Voicemail

and press OK to save.

Symbol

Change Ring Tone

Vibration

ON/OFF

Press

ring with its currently selected

tone.

Press

through available ring tones

and press OK to select and

Code

Button

save.

= Delete (Relay 1). Long press = delete all.

and

to increase

and the handset will

and

to cycle

and