Automatic Solutions AB Installatie- en gebruikershandleiding - Pagina 6

Blader online of download pdf Installatie- en gebruikershandleiding voor {categorie_naam} Automatic Solutions AB. Automatic Solutions AB 17 pagina's. Gsm intercom system

Pagina afdrukken

Advanced connections

INT Lock – Used to operate a door in conjunction with another keypad. 24v dc max voltage,

100mA sink.

O/P1 inhib – When closed, this disables all codes for relay group 1.

Sense – N/C connected to (-)GND, to be connected to N/C door contact. Can be used to generate

door open or tamper alarm.

DU out – switches to (-) ground after the Duress Code is entered. Used to trigger alarm zone, or

buzzer to notify guard. 100mA sink, 24VDC.

K or A – Not used.

Connecting DC magnetic

lock

GSM

Lock

output

Optional

keypad

Separate

output

Perform a final check of wiring and ensure the antenna is connected before switching on the

power. Once the power is switched on, the power LED should illuminate.

Power LED

GSM LED

Searching

Network found

CPU LED

Standby

Busy

P a g e

| 6

Wiring Tips

Connecting AC/DC strike

lock

GSM

output

Optional

keypad

output

PSU

Powering Up

GSM

modem

open

Lock

Separate

PSU

TIPS:

My GSM LED is still searching...

-Check the SIM card is registered and can make a call

in a phone.

-Check the SIM card is seated correctly. Power off,

clean the contacts on the SIM and the GSM unit, and

reinsert the SIM.

-Check power cable distance and thickness.

-Increase antenna height.

-Change network.

-Move antenna away from metal objects or overhanging

shrubs.

-Fit a high gain antenna.

Connecting automatic gates

GSM

Gate controller

output

Optional

keypad

output