DaytonAudio IOSUB2 Gebruikershandleiding - Pagina 2
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DaytonAudio IOSUB2. DaytonAudio IOSUB2 4 pagina's. 10" ip66 indoor/outdoor 150w subwoofer with satellite speaker outputs black
Pagina afdrukken
Thank you for purchasing the Dayton Audio IOSUB2 Indoor/Outdoor Subwoofer. This subwoofer is the
perfect choice for adding bass to an outdoor area such as a patio, pool, garden, and more. The IOSUB2
features weather-resistant construction, high-quality components and exclusive acoustic tuning by Dayton
Audio for outstanding performance.
Features
• Robust high excursion polypropylene woofer with stitched rubber surround
• IP66 weather-resistant composite enclosure
Please read these instructions completely before you begin your installation.
1. Parts Inventory
• IOSUB2
• Security eyebolt
• Wire nuts x 4
• Mounting screws x 2
• Manual
2. Recommended Installation Tools
• #2 Phillips screwdriver
• Wire cutters & wire stripper/crimp tool
• Drill and bits
3. Subwoofer Location
The subwoofer fires downward and is omnidirectional, placement is less critical than full-range speakers.
For the best results, place the subwoofer near a wall and near the full-range speakers if possible. It is
recommended that the subwoofer be within 10-15 feet of the full-range speakers. It can also be placed
under a deck or behind bushes if you prefer a stealthy install.
4. Subwoofer Installation
Once you have selected the location for your subwoofer, you are ready to start your install. Run 12-14 gauge
4-conductor outdoor-rated speaker wire from your amplifier to the location you have chosen for your sub-
woofer. It will need to be buried or suspended so make sure you mark where it is in the ground for future
reference. Your subwoofer is designed to sit flat on all four of its legs. If mounting on a deck or patio, it can
be fastened down by using the two key-hole slots in the bottom feet. To do this, simply measure the center
to center distance between the key-hole slots and install two mounting screws into the deck or patio, leaving
¼" of the screw exposed. Place the subwoofer feet on the screws and rotate clockwise until the subwoofer
is locked into the screw heads. For installation in a garden or flower bed, place the subwoofer on a flat and
level surface It is recommended to place the subwoofer on pavers to prevent debris, mulch or weeds gather-
ing under the subwoofer as foreign objects can cause poor performance and could damage the subwoofer.
Note: For anti-theft security and permanent placement,
the IOSUB2 has a built-in eyebolt that enables you to
anchor it to its location.
2