emerio FN-108776 Gebruiksaanwijzing - Pagina 5

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} emerio FN-108776. emerio FN-108776 10 pagina's.

FN-108776

PARTS DESCRIPTION

1. Front guard

2. Blade

3. Fixation screws for rear guard

4. Rear guard

5. Handle

6. Grill locking screw

7. Blade fastening screw

8. Motor shaft

9. Motor unit

10. Speed control switch

11. Oscillation knob

12. Connecting screw and nut

13. Standing shaft

14. Standing base

ASSEMBLY INSTRUCTIONS

** Please assemble correctly by the following order when using.

1. Rear guard assembly

Fit the rear guard (4) onto motor with the handle on the top. Tighten the rear guard with 4 fixation



screws (3).

2. Fan blade assembly

Install fan blade (2) onto motor shaft (8) and use the blade fastening screw (7) to fix the blade.



3. Front guard assembly

Put the hook of the front guard (1) onto the top of rear guard.



Attach front guard to rear guard, close clips and use the grill locking screw (6) to secure the two grilles



together.

OPERATING INSTRUCTIONS

Plug the power cord into a suitable socket.

Oscillation: To make the fan head oscillate, push down the oscillation knob. To stop the fan head from

oscillating, pull up the oscillation knob.

Tilting Angles: you can adjust the fan to the preferred elevation. Fix the elevation by tightening the

connecting screws.

The fan is switched on by turning the speed control switch on the motor unit, i.e. 0 = OFF, I = low speed,

II = medium speed, III = high speed.

CLEANING

Before servicing the fan and after each occasion of use, switch off the appliance and unplug the mains

cable from the socket.

Never immerse the appliance in water (danger of short-circuit). To clean the appliance, only wipe it

down with a damp cloth and dry it carefully. Always take out the mains plug first.

- 4 -