GAI-Tronics 354-001OR Gebruikershandleiding - Pagina 6
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} GAI-Tronics 354-001OR. GAI-Tronics 354-001OR 12 pagina's. Nema 4x industrial telephone
Pagina afdrukken
Pub. 42004-489D
Model 354-001 Series NEMA 4X Industrial Telephone
Page 6 of 10
Figure 4. TB1 Terminal Block on Industrial Telephone PCBA
Ring Relay Kit
The Ring Relay Kit allows the telephone to activate a peripheral device, such as a beacon or sounder,
when ring voltage is present. The kit includes a PCBA, mounting hardware, and USOC RJ11C Module
connector cord (provided with the kit).
When installed, the Ring Relay PCBA is connected to the Industrial Telephone PCBA via the USOC
RJ11C modular connector cord. This allows the telephone input wiring to be connected directly to the
Ring Relay PCBA. The Ring Relay PCBA is installed on the back of the front panel. See Figure 3 for
mounting and steps 1 through 3 in the "Ring Relay Wiring" section.
Installing the Ring Relay PCBA
1. Install the two standoffs (provided) onto the back of the panel as shown in Figure 3.
2. Align the Ring Relay PCBA with the two standoffs and secure using the two 6-32 screws provided.
f:\standard ioms - current release\42004 instr. manuals\42004-489d.doc
01/15