GAI-Tronics 354-701 Handmatig - Pagina 9
Blader online of download pdf Handmatig voor {categorie_naam} GAI-Tronics 354-701. GAI-Tronics 354-701 17 pagina's. 354-70x series nema 4x voip telephone
Pagina afdrukken
NEMA 4X VoIP Telephones
Cable Use
Size
LAN
Power
Inputs
Output contacts
Status Indication
Power
The power LED located on the VoIP PCBA illuminates when power is applied to the telephone. Refer to
Figure 7 for the location.
Heartbeat
The heartbeat LED located on the VoIP PCBA will flash when the telephone is operational over the
WLAN. Refer to Figure 7 for the location.
: It may take up to a minute for the heartbeat to initialize after power up.
N
OTE
EACT
The EACT LED located on the VoIP PCBA will turn ON when VoIP PCBA is connected to an Ethernet
device and will flash when data is being transmitted. Refer to Figure 7 for the location.
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-520A.docx
03/17
Figure 6. Internal PCBA Connections
Table 4. Recommended Cabling
Cat5 or Cat5e UTP cable with an RJ-45 connector
Two-conductor, No. 18 AWG is typical
Two-conductor, No. 22 AWG is typical
Two-conductor, No. 18 AWG is typical
Pub. 42004-520A
Page 9 of 15