GAI-Tronics Clean Phone 295F Handmatig - Pagina 2
Blader online of download pdf Handmatig voor {categorie_naam} GAI-Tronics Clean Phone 295F. GAI-Tronics Clean Phone 295F 19 pagina's.
Pagina afdrukken
- 1. General Information
- 2. Safety Guidelines
- 3. Installation
- 4. Programming Information
- 5. Local Programming
- 6. Remote Programming
- 7. Programming Instructions
- 8. Programming Table
- 9. Incoming Calls
- 10. Outgoing Calls
- 11. Operating Instructions
- 12. User Instructions
- 13. Specifications
- 14. Replacement Parts
- 15. Warranty
- 16. Return Policy
Model 295F and 295W Clean Phone™ Telephone
Local or Remote Programming
The Model 295 can be programmed locally or remotely using another DTMF telephone. The
programming mode, whether local or remote, must be entered through a series of button presses.
: The local programming password is factory-programmed as # 1 2 3 and cannot be changed.
N
OTE
The remote password is factory-programmed as 0 2 9 5, but can be changed to any four-digit number
using the programming instructions provided.
Model 295 can also be programmed to use either a long (350 ms) or short (50 ms) called-party loop
current disconnect mode. Determine your system configuration before completing this sequence.
Touch-Tone or Pulse Dialing
The Model 295 can be programmed for touch-tone (also known as dual-tone multifrequency [DTMF]) or
pulse dialing. To determine what kind of dialing you require, contact your local telephone company.
Safety Guidelines
When installing any GAI-Tronics telephone equipment, please adhere to the following guidelines to
ensure the safety of all personnel:
•
NEVER install telephone wiring during a lightning storm.
•
NEVER install telephone jacks in wet locations unless the jack is specifically designed for wet
locations.
•
NEVER touch uninsulated telephone wires or terminals unless the telephone line has been
disconnected at the network interface.
•
USE CAUTION when installing or modifying telephone lines.
If you have any questions, please call our toll-free number: 800-492-1212
d:\standard ioms - current release\42004 instr. manuals\42004-146h.doc
11/05
Pub. 42004-146H
2 of 17
Page: