Hickok FPT2600-EX1 Gebruikershandleiding - Pagina 12
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Hickok FPT2600-EX1. Hickok FPT2600-EX1 16 pagina's. I/m handheld fuel cap test system
Pagina afdrukkenChapter
Step 2—Setup
1. Remove the fuel cap from the vehicle and inspect for the following:
• Damage to the fuel cap—if damaged, replace with new cap
• Cracked or missing gasket—if damaged or missing, replace with a
new gasket.
• Dirty gasket—clean gasket or replace if necessary
IMPORTANT! Allow any fuel on the cap to evaporate before continuing.
2. Connect the appropriate
adapter to the tester's
quick disconnect fitting.
Remember, do not attach the
fuel cap until after the tester
is turned on.
3. Push the PRESS TO START
button to turn the tester on.
The LEDs will light in the following order:
• All LEDs will light briefly.
• The green PASS LED will turn on to indicate the auto zero function is
running, and then turns off.
• The red READY LED turns on indicating the tester has auto zeroed
and the unit is ready for testing.
4. Immediately install the fuel
cap on to the adapter to
begin testing. Make sure the
cap is firmly seated
Note: If testing is not started
within 20 seconds after auto
zero, the tester will turn off. If this happens, remove the cap and return to
the beginning of the setup procedure and start again.
12 FPT2600-EX1 User Guide