Hickok FPT2600-EX1 Gebruikershandleiding - Pagina 7
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Hickok FPT2600-EX1. Hickok FPT2600-EX1 16 pagina's. I/m handheld fuel cap test system
Pagina afdrukkenPRESS TO START (ON/OFF Button)—Pressing this button turns the power
on and off.
• Turning on the unit also initiates tester auto zero and the start of the test.
• The tester automatically turns off if the test is not started within 20
seconds after the unit is turned on.
• The tester also turns off automatically after the test result
LED flashes.
PASS (Green LED)—Flashes at the end of the test if the cap leak down
test passes (pressure loss is within acceptable specification).
• Steady light on after power up indicates auto zero is in progress.
• Steady light on during pumping indicates the pressure to the cap is
being built up.
FAIL / READY (Red LED)—Flashes at end of test if cap leak down test fails.
• Steady light on indicates auto zero is complete and the unit is ready
to start the test.
NO LEAK / TEST BEGINS (Green LED)—Flashes at end of test if cap leak
down test passes and no pressure loss is measured.
• Steady light on during pumping indicates pressure to cap is
sufficient to perform test—stop pumping.
OVER PRES / LOW BATT (Yellow LED)—Flashes after power on to
indicate battery voltage is low. Batteries must be replaced before testing
is performed.
• Steady light on during pumping indicates pressure to the cap is
excessive and pumping should be stopped.
Quick Disconnect Coupling—Allows quick changing of cap adapters
and provides a way to update the tester with new adapters as needed.
Pump Handle—Provides a quick and easy way to build up the necessary
pressure for testing.
Features
FPT2600-EX1 User Guide
7