ADEMCO 11BR Installatie-instructie - Pagina 2

Blader online of download pdf Installatie-instructie voor {categorie_naam} ADEMCO 11BR. ADEMCO 11BR 2 pagina's. Vibration sensors

Pagina afdrukken

Regular maintenance and inspection (at least annually) by the installer and frequent testing by the user

are vital to continuous satisfactory operation of any alarm system.

The installer should assume the responsibility of developing and offering a regular maintenance

program to the user as well as acquainting the user with the proper operation and limitations of the

alarm system and its component parts. Recommendations must be included for a specific program of

frequent testing (at least weekly) to insure the system's proper operation at all times.

While the Vibration Sensor is a highly reliable intrusion detection device it does not offer guaranteed protection against burglary. Any

intrusion detection device is subject to compromise or failure-to-warn for a variety of reasons, such as:

•

Proper operation cannot be ensured if sensors are not installed and adjusted as described in the installation instructions.

•

Vibration Sensors cannot detect vibration or forced entry when the attack; on surfaces disconnected or separated from the

mounting surface of the sensors or outside of their protection range.

•

Mechanical or electrical tampering with the sensor could compromise intrusion detection.

•

Vibration Sensors will not detect intrusion if the control device to which they are connected is not operative (because of lack

of power, malfunction, etc.)

•

Vibration Sensors, like other electrical devices, are subject to component failure. Even though the sensors are designed to

last longer than ten years, the components in them could fail at any time.

Above are cited some of the most common reasons why a Vibration Sensor can fail to detect intrusion. However, this does not imply

that these are the only reasons, and therefore it is recommended that periodic testing of this type of unit, in conjunction with testing of

the entire alarm system, be performed to ensure that the sensors are working properly.

Installing an alarm system may make one eligible for lower insurance rates, but an alarm system is not a substitute for insurance.

Homeowners, property owners and renters should continue to act prudently in protecting themselves and continue to insure their lives

and property.

We continue to develop new and improved protection devices. Users of alarm systems owe it to themselves and their loved ones to

learn about these developments.

Alarm Device Manufacturing Company, a Division of Pittway Corporation, and its divisions, subsidiaries and affiliates ("Seller"), 165 Eileen

Way, Syosset, New York 11791, warrants its products to be in conformance with its own plans and specifications and to be free from defects in

materials and workmanship under normal use and service for 18 months from the date stamp control on the product or, for products not having

an Ademco date stamp, for 12 months from date of original purchase unless the installation instructions or catalog sets forth a shorter period, in

which case the shorter period shall apply. Seller's obligation shall be limited to repairing or replacing, at its option, free of charge for materials

or labor, any part which is proved not in compliance with Seller's specifications or proves defective in materials or workmanship under normal

use and Service. Seller shall have no obligation under this Limited Warranty or otherwise if the product is altered or improperly repaired or

serviced by anyone other than Ademco factory service. For warranty service, return product transportation prepaid, to Ademco Factory Service,

165 Eileen Way, Syosset, New York 11791.

THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE OR

OTHERWISE, WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF IN NO CASE SHALL SELLER BE LIABLE TO

ANYONE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR

IMPLIED, OR UPON ANY OTHER BASIS OF LIABILITY WHATSOEVER, EVEN IF THE LOSS OR DAMAGE IS CAUSED BY THE SELLER'S

OWN NEGLIGENCE OR FAULT.

Seller does not represent that its product may not be compromised or circumvented; that the product will prevent any personal injury or

property loss by burglary, robbery, fire or otherwise; or that the product will in all cases provide adequate warning or protection. Buyer

understands that a properly installed and maintained alarm may only reduce the risk of a burglary, robbery or fire without warning, but it is not

insurance or a guarantee that such will not occur or that there will be no personal injury or properly loss as a result. CONSEQUENTLY,

SELLER SHALL HAVE NO LIABILITY FOR ANY PERSONAL INJURY, PROPERTY DAMAGE OR OTHER LOSS BASED ON A CLAIM THE

PRODUCT FAILED TO GIVE WARNING. However, if Seller is held liable, whether directly or indirectly, for any loss or damage arising under

this Limited Warranty or otherwise, regardless of cause or origin, Seller's maximum liability shall not in any case exceed the purchase price of

the product, which shall be the complete and exclusive remedy against Seller.

This warranty replaces any previous warranties and is the only warranty made by Seller on this product No increase or alteration written or

verbal, of the obligation of this Limited Warranty is authorized.

N4712 3/89

TO THE INSTALLER

WARNING

THE LIMITATIONS OF THIS VIBRATION SENSOR

ADEMCO

LIMITED WARRANTY

ALARM DEVICE MANUFACTURING CO.

165 Eileen Way, Syosset, New York 11791

A DIVISION OF PITTWAY CORPORATION