Automatic Technology 14879 Installatie-instructies
Blader online of download pdf Installatie-instructies voor {categorie_naam} Automatic Technology 14879. Automatic Technology 14879 2 pagina's. Smart phone control kit, smart hub
Pagina afdrukken
Smart Phone Control Kit
Gate Openers
NETWORK SMART HUB KIT - ORDER NO. 14879
ITEM
DESCRIPTION
1
WIRELESS HUB100 WT B&D
2
POWER SUPPLY AU 240V
3
WALL BRACKET HUB100
4
PLASTIC WALL PLUG 6.9 X 25
5
SELF TAPPING SCREW 6 X 25
6
NETWORK TRANSCEIVER MODULE
7
HARNESS 4 CORE 275 ASSY
8
ANTENNA
This device allows for operation of the gate when not in line-of-sight of the gate and
opener.
The gate may operate unexpectedly, therefore do not allow anything to stay in or near the path of the
gate. When the gate is not operating automatically, watch the gate when it is moving and keep people
away until the gate is completely opened or closed. Contact with the moving gate can cause serious
personal injury or damage to property.
It is our strong recommendation that your opener be fitted with SAFETY BEAMS. Safety
Beams detect any obstructions in the gates path and override automatic operation if one
presents. These must be installed as in accordance with AS/NZS 60335-2-95:2012.
This is in addition to regular professional servicing, and monthly obstruction tests as detailed in your
opener's Home Owners Manual.
Important Safety Instructions
WARNING!
ELECTROCUTION!
CAUTION:
Fall from ladder
Burns
Doc # 160409_00
Part # TBA
Released 07/10/19
Smart Hub Installation Instructions
QTY
1
1
1
2
2
1
1
1
•
DO NOT attempt to disassemble, repair or modify the product. This will invalidate
the warranty.
•
Do not allow children to play with the Smart Hub or your smart phone if the ATA
phone app has been installed.
•
Keep the device away from water and other liquids. In the event that water or
other liquids enter the device, power off he product immediately and clean the
device.
•
To reduce the risk of fire or electric shock, do not expose this device to rain or
moisture. The device should not be exposed to dripping or splashing.
•
DO NOT remove the cover as there are no user-serviceable parts inside.
•
Ensure ladder is the correct type for job.
•
Ensure ladder is on flat ground.
•
Ensure user has 3 points of contact while on ladder.
•
DO NOT handle damaged or leaking batteries
•
The battery backup kit contains sealed lead-acid batteries that must be disposed
of properly at the end of their useful life.
This device must be connected to power at all
times. DO NOT disconnect power after setup.