GAI-Tronics 714-001 Handmatig - Pagina 2

Blader online of download pdf Handmatig voor {categorie_naam} GAI-Tronics 714-001. GAI-Tronics 714-001 6 pagina's. Speaker amplifier enclosure

2 of 6

Page:

Model 714-001 Speaker Amplifier Enclosure

Pub. 42004-154A

Figure 1. Mounting Details

Drill or punch the hole(s) for conduit entrance. The holes should be located along the bottom of the

enclosure to help prevent water and moisture from entering. Install the conduit to the enclosure. Feed

the wiring through the conduit and into the enclosure.

Figure 2 shows the wiring details of the 714-001. Note the wiring on TB3 is used only for applications

with special equipment. If your system does not have any such special equipment, disregard that section

of the wiring details.

If the speaker amplifier's associated speaker(s) is near a handset station, feedback may occur during

paging. To avoid this feedback, refer to Figure 2, which shows how to mute the local speaker during

paging. Model 714-001 is shipped from the factory un-muted, with the legged purple wire on Terminal

After muting changes are made, unpack the station amplifier and install it following the instructions

packed with the unit.

\\s_eng\gtcproddocs\standard ioms - current release\instr. manuals (42004)\42004-154a.doc

2/97