Automation Correct Coal-trol Digital TS2 Gebruiksaanwijzing - Pagina 10

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Automation Correct Coal-trol Digital TS2. Automation Correct Coal-trol Digital TS2 16 pagina's. Automation correct coal-trol digital – model ts2 thermostat

Pagina afdrukken
Instruction Manual

SETUP Menu Operation

DISPLAY
SETUP
S 1154A
MENU button
DEG F
MENU button
MIN 4
MENU button
MAX 40
MENU button
TBRN N
HLF 0
Continued on next page
Automation Correct LLC
Coal-trol Digital™ – Model TS2 THERMOSTAT
The SETUP menu is for initial setup and advanced features.
Under normal operation, these setting need not be adjusted..
ACTION
Starting from the Round-Robin
display, press and hold the
MENU button until SETUP is
shown on the display.
(2 seconds)
SET Time of Day Clock Value
Press UP or DOWN button to
adjust. Display shows 'A' for
AM, 'P' for PM.
Temperature Units
DEG C
UP button
DOWN button
Minimum Stoker Feed Value
Press UP button to increase
MIN feed rate, DOWN to
decrease MIN feed rate.
Maximum Stoker Feed Value
Press UP button to increase
MAX feed rate, DOWN to
decrease MAX feed rate.
TBRN Y
UP button
DOWN button
HEAT LOSS FACTOR
Press UP button to increase,
DOWN button to decrease.
'0' = Minimum Heat Loss
'1' = Low Heat Loss
'2' = Medium Heat Loss
'3' = High Heat Loss
SETUP is displayed for only 1
second.
After extended power loss, the
time of day setting may be
adjusted without entry into
SETUP menu.
Press UP button for Deg. C or
the DOWN button for Deg. F.
temperature units.
MIN feed value cannot be
increased beyond the MAX
feed value.
MAX feed value cannot be
decreased below the MIN feed
value.
Set to 'Y' for Tri-burner type
feeders, otherwise set to 'N'.
Advanced setting that may
reduce temperature overshoot
after a set point change. The
Heat Loss Factor nominally
represents
quality of the dwelling the
thermostat
Experimentation
number
required.
6/2006 R0
Page 10
NOTE
the
insulation
is
controlling.
over
of
days
may
be
www.automationcorrect.com
a