Automation Correct Coal-trol Digital TS2 V3 Gebruiksaanwijzing - Pagina 8

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Automation Correct Coal-trol Digital TS2 V3. Automation Correct Coal-trol Digital TS2 V3 16 pagina's.

Pagina afdrukken
Instruction Manual

Power-up Sequence

Upon first power to the thermostat, the display will momentarily show the
firmware version number, the thermostat type, and a manufacture type.
The thermostat will then enter and wait for the time of day clock to be set,
with the status light blinking. If the thermostat has been running normally
and the power is interrupted, the display will sequence as above, but will
skip the clock setting step and proceed directly to control of the appliance.

MENU Button Operation

The MENU button is used to access all settings of the thermostat. Three
areas are accessible depending on the manner that the MENU button is
pressed. The MENU may be momentarily pressed, or pressed and held
for 2 seconds, or pressed and held for 5 seconds.
Starting from the Round-robin display
OPERATION Menu Access
Momentary
press MENU
button.
Display changes to:
FSA
Momentary press
MENU button
FAN SPEED Control
FEED RATE Indication
DAYTIME Setback
NIGHTTIME Setback
See page 9
In the documentation that follows, it is assumed that the
Round-robin display is the 'Action' step starting point.
Automation Correct LLC
Coal-trol Digital™ - Model TS2 V3
Overview of the MENU System
SETUP and EXTENDED Menu Access
Press and hold
MENU button
for 2 seconds.
Display changes to:
SETUP
Momentary press
MENU button
SETUP Menu Operations
See page 11
5/2010 R0
Press and hold
MENU button
OR
for 5 seconds.
Display changes to:
FEED
Momentary press
MENU button
EXTENDED Menu Operations
See page 13
www.automationcorrect.com
Page 8