Automation Direct DURApulse GS20 Series Snelstarthandleiding - Pagina 5
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Automation Direct DURApulse GS20 Series. Automation Direct DURApulse GS20 Series 6 pagina's. Sensorless vector control variable frequency micro-drive
Ook voor Automation Direct DURApulse GS20 Series: Snelstarthandleiding (9 pagina's)
Pagina afdrukken
DURApulse GS20X NEMA 4X AC Drive Quick-Start Guide
Cooling and Heat Dissipation
Airflow Rate for Cooling
Power Dissipation (Watts)
Model
Flow Rate
Flow Rate
Loss External
Number
(cfm)
(m
3
/hr)
(Heat sink)
16.3
GS21X-20P5
29.1
GS21X-21P0
16.5
GS23X-20P5
29.1
GS23X-21P0
17.6
GS23X-40P5
0.0
0.0
30.5
GS23X-41P0
46.5
GS21X-22P0
50.1
GS23X-22P0
45.9
GS23X-42P0
60.6
GS23X-43P0
70.0
GS21X-23P0
76.0
GS23X-23P0
27.3
46.4
108.2
GS23X-25P0
93.1
GS23X-45P0
192.8
GS23X-27P5
33.5
56.6
132.8
GS23X-47P5
164.7
GS23X-4010
• External Flow Rate is across the heat sink.
• When calculating power dissipation (Watt
• Internal Flow Rate is through the chassis.
Loss), use the Total value. Heat dissipation
• Published flow rates are the result of active
shown in the chart is for installing a single
cooling using fans, factory installed in the
GS20X drive in a confined space.
drive.
• When installing multiple drives, the volume
• Unpublished flow rates ( - ) are the result
of heat/power dissipation should be the heat/
of passive cooling in drives without factory
power dissipated by a single GS20X drive
installed fans.
multiplied by the number of GS20X drives.
• The required airflow shown in the chart
• Heat dissipation for each model is calculated
is for installing a single GS20X drive in a
by rated voltage, current and default carrier
confined space.
frequency.
• When installing multiple GS20X drives, the
required air volume would be the required
air volume for a single GS20X drive
multiplied by the number of GS20X drives.
GS20X_QSP_1ed 11/18/2019
Environment for Operation, Storage, and Transportation
Do not place the GS20X drive in a critical environment, such as direct contact with chemical substance and
solvent, or exposure to direct sunlight.
PCB design is compliant with IEC60364-1/IEC60664-1 Pollution degree 2. The outer case
Internal
Total
Installation Location
meets IP66 standard for indoor use. If the drive is for outdoor application, avoid direct
sunlight.
14.5
30.8
Operation: -20°C to +40°C, -20°C to +50°C with derating
Surrounding
20.1
49.2
Storage: -40°C to +85°C
Temperature
12.6
29.1
No condensation, non-freezing
20.1
49.2
Operation: 0–100%
Rated Humidity
11.1
28.7
No condensed water
Air Pressure
Operation: 86 to 106 kPa
17.8
48.3
IEC60721-3
31
77.5
Operation:
24.2
74.3
Pollution Level
Class 3C2; Class 3S2
21.7
67.6
No concentrate
22.8
83.4
35.0
105.0
30.7
106.7
Altitude
Operation
40.1
148.3
42.0
135.1
Storage
53.3
246.1
Package
Transportation
Drop
39.5
172.3
53.3
246.1
Operating
Vibration
Non-operating
Operating
Impact
Non-operating
Protection Level
To prevent personal injury, please make sure that the case and wiring are installed
according to these instructions. The figures in these instructions are only for reference.
They may be slightly different from the one you have, but it will not affect your
customer rights.
These installation instructions may be revised without prior notice. The most recent
edition can be downloaded from the AutomationDirect web site at any time:
http://www.automationdirect.com/static/manuals/index.html.
Minimum Mounting Clearances
When installing your GS20X drive, please keep the following in mind:
• Prevent fiber particles, scraps of paper, shredded wood, saw dust, metal particles, etc., from adhering to the
heat sink.
• Install the AC motor drive in an incombustible (non-flammable) indoor environment to prevent the risk of
accidental fire.
• Install the AC motor drive in Pollution Degree 2 environments only: normally only nonconductive pollution
occurs and temporary conductivity caused by condensation is expected.
←
(Blue Arrow) Inflow
Installation Method
Single drive installation
Transportation: -20°C to +70°C
Storage/Transportation: Max. 95%
Storage/Transportation: 70 to 106 kPa
Storage:
Transportation:
Class 2C2; Class 2S2
Class 1C2; Class 1S2
If the GS20X drive is installed at altitudes of 0~1000m, follow normal
operation restriction. If installed at altitudes of 1000~2000m, decrease
1% of rated current or lower 0.5°C of temperature for every 100m
increase in altitude. Maximum altitude for Corner Grounded is 2000m.
Contact ADC for more information if you need to use this motor drive at
an altitude of 2000m or higher.
ISTA procedure 1A (according to weight) IEC60068-2-31
1.0mm, peak-to-peak value range from 2Hz to 13.2 Hz; 0.7G~1.0G range from
13.2Hz to 55Hz; 2.0G range from 55Hz to 512 Hz. Complies with IEC 60068-2-6.
2.5 G peak, 5Hz~2kHz: 0.015" maximum displacement.
IEC/EN60068-2-27: 15G, 11ms
30G
IP66 / NEMA4X
←
(Red Arrow) Outflow
Single drive Independent installation.
Ambient Temperature
A
B
Max
Max
(mm)
(mm)
(w/out derating)
(Derating)
50
30
40
50
DURApulse GS20X AC Drive Quick-Start Guide – 1st Ed 11/18/2019
Page 5