HID Mercury MR52-S3B Installaties en specificaties - Pagina 13

Blader online of download pdf Installaties en specificaties voor {categorie_naam} HID Mercury MR52-S3B. HID Mercury MR52-S3B 19 pagina's. Reader interface

Pagina afdrukken

Powering

Trusted Identities

2.9 Status LEDs

2.9.1 Power-up

All LEDs are OFF.

2.9.2 Initialization

Once power is applied, initialization of the module begins.

When initialization is completed, LEDs A through R2 are briefly sequenced ON then OFF.

2.9.3 Run time

After the above sequence, the LEDs have the following meanings:

LED

Description

A LED

Off-line: 1 sec rate, 20% ON

heartbeat and on-

On-line: Non-encrypted communication: 1 sec rate, 80% ON Encrypted communication: .1 sec ON, .1 sec OFF, .1 sec

line status

ON, .1 sec OFF, .1 sec ON, .1 sec OFF, .1 sec ON, .3 sec OFF

A LED

Error Indication: Waiting for application firmware to be downloaded: .1 sec ON, .1 sec OFF.

B LED

SIO Communication Port Status: Indicates communication activity on the SIO communication port

1 LED

Input Status: IN1

2 LED

Input Status: IN2

3 LED

Input Status: IN3

4 LED

Input Status: IN4

5 LED

Input Status: IN5

6 LED

Input Status: IN6

7 LED

Input Status: IN7

8 LED

Input Status: IN8

TMP

Cabinet tamper

PFL

Power fault

Input in the inactive state: OFF (briefly flashes ON every 3 seconds), Input in the active state: ON (briefly flashes OFF

every 3 seconds), Input in a trouble state: Rapid Flash.

R1 LED

Reader port 1:

Clock/Data Mode: Flashes when data is received, either input

D1/D0 Mode: Flashes when data is received, either input

RS-485 Mode: Flashes when transmitting dataF/2F Mode: Flashes when data/acknowledgment is received

R2 LED

Reader port 2:

Clock/Data Mode: Flashes when data is received, either input

D1/D0 Mode: Flashes when data is received, either input

RS-485 Mode: Flashes when transmitting dataF/2F Mode: Flashes when data/acknowledgment is received

K1 through

Illuminates when output relay RLY 1 (K1) through RLY 6 (K6) is energized.

K6 LEDs

Every three seconds, LEDs A through R2 are pulsed to their opposite state for 0.1 sec.

PLT-06451, A.1

HID® Mercury™ MR52-S3B Reader Interface

Installation and Specifications

September 2023