Celestron ASTROMASTER 21061-CT-DS Handleiding voor snelle installatie

Blader online of download pdf Handleiding voor snelle installatie voor {categorie_naam} Celestron ASTROMASTER 21061-CT-DS. Celestron ASTROMASTER 21061-CT-DS 8 pagina's. 70 az telescope

Pagina afdrukken

Your AstroMaster includes: Optical tube, StarPointer finderscope

(with CR2032 3V battery), pre-assembled tripod with center leg

brace and altazimuth mount attached, two eyepieces, erect image

diagonal, accessory tray, lens cloth and a owner's manual.

All three legs should be the same length to provide a level platform

for the telescope.

Here is how the fully assembled tripod and mount should appear.

To set up the tripod, spread the legs outward until they are fully

extended. Extend each of the three tripod legs down 6-12".

To attach the accessory tray, line up notches and turn clockwise

until tray tabs lock into place with the tripod brackets.

Dovetail

Mount

Fastening

Screws

Next, slide telescope tube's dovetail into the mount. Be sure to back

out fastening screws to allow enough clearance for the dovetail.

AZ TELESCOPE

Q U I C K S E T - U P G U I D E

#21061-CT-DS

Use the three tightening screws located at the bottom of each leg

to secure the extended legs in place.

Properly assembled, the accessory tray should appear as

pictured above.

Dovetail

Center dovetail in the mount and tighten fastening screw. For

added security tighten the angled lock down screw next to the

fastening screw.

ENGLISH