DynaLock 7350 Snelstarthandleiding - Pagina 2

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} DynaLock 7350. DynaLock 7350 2 pagina's.

Pagina afdrukken
Open Code Test:
The Open Code is used mainly as a way to test
the Lock relay upon finishing the installation.
Once all the wires have been connected,
and the keypad has been powered,
the Mode Indicator LED will turn green.
The Door Indicator LED will be off.
Enter
2580
(Factory Preset) into the
keypad.
Both Mode & Door Indicator LED's will
turn green and the door will unlock.
Once the Door Indicator LED turns off,
the door will relock.
**This feature is applicable to 1st time instal-
lations only. Once any User Codes are pro-
grammed and/or any Auxiliary Codes changed,
the default Open Code (2580) is erased**

Programming Mode:

You must enter Programming Mode to change, or
delete any code, as well as change any setting.
To enter Programming Mode:
1) Depress the # key
TWICE,
succession, within 0.5 seconds.
MODE INDICATOR LED TURNS OFF
DOOR INDICATOR LED TURNS RED
2) Enter the Programming Code 1234
(factory preset).
MODE INDICATOR LED REMAINS OFF
DOOR INDICATOR TURNS GREEN
You are now in Programming Mode.

Exiting Programming Mode

Depress the # key
TWICE
, in succession,
within 0.5 seconds.
YOU WILL HEAR THREE BEEPS
DOOR INDICATOR WILL TURN OFF
MODE INDICATOR WILL TURN GREEN
**For security reasons it is highly recommended
to change the Programming Code. Refer to
"Changing the Programming Code"
in the instruction manual**
MODE
GREEN
MODE
GREEN GREEN
within
MODE
MODE
MODE
GREEN
Programming & Testing Primary User Codes:
This explains how to program a primary, four
digit User Code. The keypad is factory preset for
four digit User Code's.
DOOR
Refer to "Pin Code Length/Factory Default
Setting" section of your instruction manual
to change the PIN code length for your User
Code's.
Refer to "Enrolling Codes-Primary & Second-
DOOR
ary Codes Definitions" section of your instruction
manual for a breakdown of Primary & Secondary
Codes.

Programming User Codes:

1) Enter Programming Mode.
MODE INDICATOR LED TURNS OFF
DOOR INDICATOR LED TURNS GREEN
2) Depress -7- to enter menu 7.
MODE INDICATOR LED REMAINS OFF
DOOR INDICATOR LED TURNS ORANGE
3) Enter the 3 digit User Slot number
(from 001 to 500).
Example: User Slot 003 represents User
Number 3.
DOOR
MODE INDICATOR LED FLASHES GREEN
RED
DOOR INDICATOR LED REMAINS ORANGE
4) Enter a four digit User Code for that
user. If the code is valid, the Mode
Indicator LED will stop flashing, and the
User Code has been programmed.
DOOR
Depress the # key
GREEN
keypad will exit Programming Mode.
Testing User Codes:
1) Make sure the keypad is in
Normal Mode.
2) Enter the User Code.
MODE INDICATOR LED TURNS GREEN
DOOR
DOOR INDICATOR LED TURNS GREEN
3) The lock relay will trigger for 5 seconds
(default) to release the door.
TWICE
, in succession, and the
MODE
DOOR
GREEN
MODE
DOOR
ORANGE
R
MODE
DOOR
GREEN ORANGE
MODE
DOOR
GREEN
MODE
DOOR
GREEN GREEN