Hiddn LapTop1+ Gebruikershandleiding - Pagina 3

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Hiddn LapTop1+. Hiddn LapTop1+ 4 pagina's.

Pagina afdrukken
3. Change PIN/password
If not blocked by your KMS Administrator, the PIN/Password can be changed by the user in the
following way:
Make sure the Key Token is not inserted in the reader.
1.
Turn on the computer
2.
The message "Waiting for Key Token. Please insert..." appears on the screen
3.
Press the F1 key to change password
4.
Insert Key Token in reader
5.
Enter old PIN/Password
6.
Enter new PIN/Password
7.
Re-enter new PIN/Password
8.
If the operation succeeds, "PIN code successfully changed" appears on the screen. Press any key
9.
to finish authentication.
If the PIN/password do not comply with the policy defined by your local administrator, it will be
10.
rejected and you will be asked to enter a stronger PIN.
4. Display status information
Information about the installed unit can be obtained as follows:
Make sure the Key Token is not inserted in the reader.
1.
Turn on the computer
2.
The message "Waiting for Key Token. Please insert..." appears on the screen
3.
Press the F2 key to display version information and serial numbers
4.
Press T to display the temperature of the Crypto Module
5.
Inserting a Key Token in the smart card reader will show version and serial numbers
6.
5. The Backup Key Token
If you lose the User Key Token, you can use a Backup Key Token to get access to your data. This is
intended for emergency use. The Backup Key Token may be purchased with the unit, or issued by
your local KMS Administrator.
Power on the computer
1.
Observe that the message "Waiting for Key Token. Please insert..." appears
2.
Insert the Backup Key Token
3.
Observe that the message "New User Key Token detected. Press any key to continue..." to
4.
appear
Enter your PIN/password and confirm with Enter
5.
Wait for the computer to reboot
6.
Remove the Backup Key Token
7.
The computer will boot as normal and is ready for use
8.
Backup your data
9.
Zeroize the module using the Zeroize card or the zeroize button on the [hiddn]® LapTop1+ unit
10.
Obtain a new set of [hiddn]® Smart Cards, reinitialize the [hiddn]® LapTop1+ unit and restore
11.
your data from the backup media.
AS
Hiddn Security
http://www.hiddn.no
//