2gig Technologies Go!Control Panel Gebruikershandleiding - Pagina 15

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} 2gig Technologies Go!Control Panel. 2gig Technologies Go!Control Panel 20 pagina's.

Pagina afdrukken

AWAY MODE

Away mode is for arming the system when

everyone is leaving the premises. Away

mode arms all sensor‐protected perimeter

doors and windows, interior motion sensors,

interior glass break sensors, and any other

sensor‐protected interior doors. The

premises must be unoccupied while the

system is armed. Away mode is typically

used for arming the system during the

daytime hours in a residential location, and

non‐business hours in a commercial location.

When the system is armed in Away mode,

you cannot move about the premises

without triggering the burglary alarm (if the

system is installed with interior motion

detectors). An alarm also occurs if any

sensor‐protected door or window is opened

or glass breakage is detected (if glass

breakage detectors are installed in your

system).

Exit and Entry Delays in Away

mode

Certain sensors, such as a door, can be setup

by your installer to have a delay before

triggering an alarm. This provides a way for

an authorized person to exit and reenter the

premises without triggering an alarm.

•

Exit Delay allows time to leave after

arming the system.

•

Entry Delay allows time to enter and

disarm the system before an alarm is

triggered.

When arming the system in

Away mode, an Entry Delay

check box is shown on the

Arming screen. By default,

this option is checked, so the

programmed delay doors allow time for

disarming the system after the door is

opened. If you un‐check this box, the

delayed alarm trigger is removed from all

sensor‐protected doors programmed for

delay. Those entrances instantly trigger an

alarm if they are opened in Away mode.

NOTE: With the Entry Delay disabled,

you must remotely disarm the

system with a wireless key fob

before entering.

Exit Delay Restart

The Exit Delay Restart option extends the

Exit Delay one time if you need to re‐enter

the premises. With the Exit Delay Restart

option, when you re‐enter the premises

after you have left, but before the Exit Delay

timer expires, will restart the Exit Delay

timer, giving you the full length of time to

leave again.

TIP: The Exit Delay Restart option only works

once, each time the system is armed.

Silent Control in Away Mode

Three options for silencing the beeps and

announcements are available when arming

or disarming the system in Away mode.

•

On the Control Panel's Home and

Security screens, a Silent Control button

is displayed.

•

On the Arming screen, a Silent Exit check

box is displayed.

•

On the Exit Delay screen, a Silence

button is displayed.

Selecting any of these options silences the

Control Panel beeps and announcements,

and when arming, selecting Silent Control

doubles the length of the Exit Delay.

Burglary Protection