8BitMods MemCard PRO Gebruikershandleiding - Pagina 10

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} 8BitMods MemCard PRO. 8BitMods MemCard PRO 15 pagina's.

WebUI Settings Page

static text for long period of times. In order to reduce the effect of this, MemCard PRO will automatically dim or turn off the display

after 30 seconds of inactivity. When there is activity it will automatically brighten or turn on the display, until the next period of

inactivity.

• Display Brightness: You can select the display brightness by moving the slider. MemCard PRO offers 10 steps of brightness. This is

the "bright" mode, and doesn't affect the brightness of the dimmed mode - which is always at the lowest scale.

• Firmware Version & Update: The currently installed ﬁrmware version is displayed here. Upon loading this page, MemCard PRO will

check the latest available version on the remote server and enable the button if a newer version is available.

• Performing a ﬁrmware update: If the Update button is available, clicking it will start the update process. Please let the process

complete before removing MemCard PRO from the Console or turning the console off!

The Settings page allow you to conﬁgure your MemCard PRO. The available

options are:

• Wi-Fi Switch: Allows you to turn off the WiFi receiver / transmitter on MemCard

PRO. Please note that doing so will completely turn off the WiFi radio. You can only

re-enable the WiFi radio by resetting the MemCard PRO settings back to factory

defaults.

• Load last used card on Reset: This feature allows you to enable / disable

loading the last used VMC automatically on power up. This option is enabled by

default.

• Display Saver Mode: This option allows you to select what MemCard PRO does

when triggering the display saver mode. The available options are "Dim" and "Turn

Off". OLED displays are naturally bright, but can suffer from burn-in when showing

Page 10