Dynamic OH1010-B Installatie-instructies - Pagina 2

Blader online of download pdf Installatie-instructies voor {categorie_naam} Dynamic OH1010-B. Dynamic OH1010-B 4 pagina's. Dynamic overhead air purification system

Pagina afdrukken

Section II. Installation:

1. Remove the unit form its carton. Be sure to remove and discard all packing material. Place the

unit on a level surface with the grill side facing up.

2. Open the lid by depressing the button on the side of the unit. Lift the grill and remove the two

press-in plugs in the tracks for the grill arms.

3. Remove the grill arms by pushing the roller wheels through the track. Open the lid fully.

4. Remove the two screws holding the ground screen. Pull the screen out of the slots.

5. Using a 5/32" Allen wrench, remove the fan from the motor shaft.

6. Power to the unit can be run through one the electrical knock-outs provided in the cabinet. Follow

local electrical codes and ordinances.

7. The unit can now be mounted either partially recessed into a drop ceiling, with 4.25" exposed, or

fully exposed on a hard surface, with 9.25" of total depth exposed. The unit can be suspended

using threaded rod or chain and hooks, or can be mounted directly to a surface with lag bolts and

washers. The OH1010 can be mounted vertically on a wall.

23.75

23.75"