Automationdirect.com Productivity 2000 P2-11B Handmatig - Pagina 5
Blader online of download pdf Handmatig voor {categorie_naam} Automationdirect.com Productivity 2000 P2-11B. Automationdirect.com Productivity 2000 P2-11B 8 pagina's. Base
Pagina afdrukken
Grounding
A good common ground reference (earth ground) is essential for
proper operation of the Productivity2000 system. One side of all
control circuits, power circuits and the ground lead must be prop-
erly connected to earth ground by either installing a ground rod in
2"
close proximity to the enclosure or by connecting to the incoming
50mm
min
power system ground. There must be a single-point ground (i.e.
copper bus bar) for all devices in the enclosure that require an
earth ground.
Temperature Considerations
3"
7.2"
76mm
183mm
The Productivity2000 system should be installed within the oper-
min
min
ating temperature specifications as listed in this document. If the
temperature deviates above or below the specification, measures
such as cooling or heating the enclosure should be taken to main-
3"
76mm
tain the specification.
min
Power Considerations
The Productivity2000 system is designed to be powered by the
110/220 VAC power supply (P2-01AC). The Productivity2000 has
2"
achieved CE certification without requiring EMF/RFI line noise
50mm
min
filters on the AC power supply. Please review the "EU Directives"
document, located in the User Manual or at
www.productivity2000.com, for applications which require CE
Compliance.
5
Sales 800-633-0405
www.productivity2000.com