Celestron 44320 Gebruiksaanwijzing - Pagina 4

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Celestron 44320. Celestron 44320 8 pagina's. Digital microscope kit

MICROSCOPE OPERATION

VIEWING A SPECIMEN

Carefully place a specimen slide under the stage clips Fig.

area with the hole in the center and Figure 4

specimen slide centered over the hole in the stage. It will

take some experimenting to place slides or objects in the

center of the stage as the image you see is upside down

FOCUSING & CHANGING POWER (MAGNIFICATION)

focus on the specimen. Note that for very small objects,

you should set them on the clear slide with a recessed hold

in the center.

have the zoom eyepiece at the 10x position, all the way

that you will have to refocus whenever you rotate the

eyepiece to obtain a sharp focus.

holding the microscope above the nosepiece with one

shows the stage

shows a

IGURE

and reversed but after some usage you will have an easy

You are now ready to focus and view the specimen, but ﬁrst

you must take some precautions so you do not damage a

specimen slide or valuable object. When using the higher

powers while you are focusing, make sure that the objective

lens does not hit the slide or object being viewed.

IGURE

hand and rotate the nosepiece with the other hand until it

clicks at the position. Be cautious not to let the objective

lens touch the specimen slide or object when changing

to lower the stage to a low position. Note the power

range of the objective lens you are using is shown on the

nosepiece after it clicks into position.

4. At the highest powers, your views will be greatly

magniﬁed but somewhat darker. The most enjoyable

views can be at the lower powers which have a wider

ﬁeld of view and brighter illumination.

ILLUMINATION

To get the sharpest and best views, the illumination

illuminator to turn it on/off. After some usage, you can

determine the best way of adjusting the light to provide

the most pleasant views.

IGURE