Automationdirect.com Productivity 3000 P3-08AD Snelstarthandleiding - Pagina 4
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Automationdirect.com Productivity 3000 P3-08AD. Automationdirect.com Productivity 3000 P3-08AD 8 pagina's. Analog input
Pagina afdrukken
Module Installation Procedure
WARNING:
Align
steps are completed. See hot-swapping procedure for
here
exceptions.
AVERTISSEMENT:
champ avant l'exécution des étapes qui suivent. Consultez la
procédure de remplacement à chaud pour les exceptions.
Step One:
press firmly to seat module into connector.
Step Two:
Align
tabs toward module face. Click indicates lock
here
is engaged.
Step Three:
Attach field wiring using
optional terminal block or ZIPLink wiring
system and install cover.
WARNING:
Explosion hazard – Do not connect or disconnect connectors or
operate switches while circuit is live unless the area is known to be non-hazardous.
Do not hot-swap modules unless the area is known to be non-hazardous.
AVERTISSEMENT:
Risque d'explosion : ne pas connecter ou déconnecter les connec-
teurs ni actionner les commutateurs alors que le circuit est sous tension, à moins que la
zone ne soit reconnue non dangereuse. Ne pas remplacer à chaud les modules à moins
que la zone ne soit reconnue non dangereuse.
4 4
www.automationdirect.com/P3000
Do not apply field power until the following
Ne pas appliquer la puissance de
Align circuit card with slot and
Pull top and bottom locking
To install or remove terminal
block cover, press middle to flex
cover.
Terminal Block Removal
2. Loosen self-
jacking screws
to disengage
terminal block.
1. Pull hinged
door open
here.
Important Hot-Swap Information
The Productivity3000 PAC supports hot-swap!
Individual modules, expansion bases, and entire
remote base groups can be taken offline, removed, and
replaced while the rest of the PAC system continues
controlling your process. Before attempting to use the
hot-swap feature, be sure to read the hot-swap topic in
the programming software's help file or our online docu-
mentation at AutomationDirect.com for details on how to
plan your installation for use of this powerful feature.
Tech Support 770-844-4200
3. Grip opened door along
edge to avoid flexing door
and pull terminal block
from module.
Do not grip
NOTE:
door in middle.