Gait up PhysiGait Live Gebruikershandleiding en resultaatparameters - Pagina 4

Blader online of download pdf Gebruikershandleiding en resultaatparameters voor {categorie_naam} Gait up PhysiGait Live. Gait up PhysiGait Live 19 pagina's.

Pagina afdrukken

Gait Up SA

EPFL Innovation Park, Bat C. CH-1015 Lausanne

www.gaitup.com

TVA CHE-145.136.760

3. Recording with Physilog

5 and the PhysiGait Live - details

3.1

Connection to mobile application

Each time you open the application from completely closed state you need to connect the

two Physilog®5 to the mobile device. Once they are connected you don't need to repeat this

procedure when switching between different parts of the application.

To connect Physilog®5 to the application for gait analysis, login with your user name (email

address) and password and enter the "Gait analysis" functions of the app. Allow Bluetooth

to be turned on the device and establish a connection to the internet. There is no need to

pair your Physilog® with the tablet prior to Bluetooth communication.

Click on the "Available Physilogs" refresh button below the picture of

the Physilog®5 on the left of the screen of the application to look for

available sensors. Chose two Physilog® from the list and click on the

"Connect" button beside the sensor name. The name of the sensor

contains the number which is written on the back of the Physilog®5.

Troubleshoot: If a sensor is not detected by the tablet, shortly press

the main button of the sensor to enter detection mode. If the sensor can still not be

connected, check that it has enough battery and is not connected to another mobile device

and if necessary ultimately do a reset of the sensor as explained in section 4.4 Troubleshoot.

If the sensor has incompatible firmware version for using with the app, the app displays an

error message and automatically disconnects from the sensor. If the sensor is blinking after

disconnection, you need to do a soft reset of the sensor (see section 4.4 Troubleshoot).

Physilog5 user manual explains how to update firmware.

When the sensors are connected the button changes to "Disconnect"

and a green dot appears besides the sensor name. You can see a

battery level estimation for each sensor below the battery symbol and

you can check if the sensor is measuring correctly by displaying the

raw data inside the Signals Visualizer part of the app.

For devices with small screen (such as smart phones), the sensor

connection screen is available after clicking on the image of

PhysiGait user manual v1.3.1 Date: 29.04.2019