Gait up Physilog 4 Gebruikershandleiding en specificaties - Pagina 2

Blader online of download pdf Gebruikershandleiding en specificaties voor {categorie_naam} Gait up Physilog 4. Gait up Physilog 4 6 pagina's.

Pagina afdrukken

Recording with Physilog

Start

• Put all of your sensors on a

table

• Press on the ON/OFF button for

1-2 seconds (green LED on and

off again)

• The LED is blinking

green

every

second - For synchronous

measurement, refer to the

"Practical considerations" page.

• > Physilog® is recording

Charging and Data Transfer

Plug

•Plug the micro USB to the

Physilog®

•Plug the USB to the

Computer or Charger

Attach

• Fix the Physilog® on the subject

Charging

•When connected to the

computer via USB port or

a charger

, the LED blinks

orange

•> Physilog is charging

•When it is fully charged,

it shines

green

*Charger is not provided by Gait Up. Gait Up

declines any responsibility due to charger

usage. Please refer to supply voltage in the

product specification section.

Sense

• Ask the subject to perform a

movement according to your

protocol

Connect

•When connected to a

computer, the LED is

blinking

multicolor

•Wait for few seconds

•>Physilog® is connected

to your computer

Stop

• Once the subject has finished,

press again on the button for a

few seconds

• The LED shines orange, then

blinks 3 times

green

and then

turns off

• > Physilog® has created one file

and stopped recording

Transfer

•Copy and paste Physilog®

files (*.bin) to your

preferred destination