GajShield GS40nu Snelstarthandleiding - Pagina 6

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} GajShield GS40nu. GajShield GS40nu 12 pagina's. Data security firewall

WAN Conﬁgura�on

Interface Type: GajShield ﬁrewall supports 3 types of network modes standard, PPPoE Connec�on & DHCP.

i. Standard Mode

IP Address & Netmask enter IP details provided by your ISP.

Next Hop IP is ISP Gateway or router IP.

MTU (Maximum Transmission Unit) Insert maximum packet size, in bytes, that can be sent through the interface.

NOTE: We recommend that you use the default, 1500 bytes, unless your network equipment requires a diﬀerent packet size.

ii. PPPoE Connec�on

IP Address & Netmask select (Sta�c / Dynamic) depending on your ISP se�ngs.

Next Hop IP select (Sta�c / Assigned by Remote) depending upon your ISP se�ngs.

Access Concentrator the PPPoE server name provided by the ISP

NOTE: Leave it empty if ISP does not provide a server name.

Service Name enter ISP name or details provided by service provider.

Username / Password Insert username & password provided by ISP for PPPoE authen�ca�on.

5. Enter ISP IP details under WAN Conﬁgura�on.