Celestron NexStar 8i Addendum - Pagina 5
Blader online of download pdf Addendum voor {categorie_naam} Celestron NexStar 8i. Celestron NexStar 8i 5 pagina's. Celestron nexstar 8i: product manual
Ook voor Celestron NexStar 8i: Handleiding communicatieprotocol (8 pagina's)
Pagina afdrukken
3.
The SELECT OBJECT message will appear in the top row of the display. Use the Up and Down scroll keys
(10) to select the daytime object (planet, moon or sun) you wish to align. Press ENTER.
4.
NexStar then asks you to center in the eyepiece the alignment object you selected. Use the direction arrow
buttons to slew the telescope to the alignment object and carefully center it in the finderscope. Press ENTER
when centered.
5.
Then, center the object in the eyepiece and press ALIGN.
Once in position, the NexStar will model the sky based on this information and display Align Successful.
•
For safety purposes, the Sun will not be displayed in any of the hand control's customer object lists unless it
is enabled from the Utilities Menu. To allow the Sun to be displayed on the hand control, do the following:
1.
Press the UNDO button until the display reads "NexStar SE"
2.
Press the MENU button and use the Up and Down keys to select the Utilities menu. Press ENTER.
3.
Use the UP and Down keys to select Sun Menu and press ENTER.
4.
Press ENTER again to allow the Sun to appear on the hand control display.
The Sun can be removed from the display by using the same procedure as above.
To improve the telescope pointing accuracy, you can use the Re-Align feature as described in your owner's manual.
C
C
o
o
n
n
s
s
t
t
e
e
l
l
l
l
a
a
t
t
i
i
o
o
n
n
T
T
o
o
u
u
r
r
In addition to the Tour Mode, the NexStar telescope has a Constellation Tour that allows the user to take a tour of all
the best objects within a particular constellation. Selecting Constellation from the LIST menu will display all the
constellation names that are above the user defined horizon (filter limits). Once a constellation is selected, you can
choose from any of the database object catalogs to produce a list of all the available objects in that constellation.
•
To see information and data about the displayed object, press the INFO key.
•
To slew to the object displayed, press ENTER.
•
To see the next tour object, press the Up key.
Sun Menu
For safety purposes the Sun will not be displayed as a database object unless it is first enabled. The enable the Sun, go
to the Sun Menu and press ENTER. The Sun will now be displayed in the Planets catalog as can be used as an
alignment object when using the Solar System Alignment method. To remove the Sun from displaying on the hand
control, once again select the Sun Menu from the Utilities Menu and press ENTER.
Scrolling Menu
This menus allows you to change the rate of speed that the text scrolls across the hand control display.
•
Press the Up (number 6) button to increase the speed of the text.
•
Press the Down (number 9) button to decrease the speed of the text.
Tips for Using Solar System Align
2835 Columbia Street, Torrance, CA 90503 • Phone (310) 328-9560 • Fax (310) 212-5835
5
06-05