Celestron StarSense AutoAlign Handmatig - Pagina 3

Blader online of download pdf Handmatig voor {categorie_naam} Celestron StarSense AutoAlign. Celestron StarSense AutoAlign 15 pagina's.

INTRODUCTION

StarSense™ is patented technology that allows your telescope to determine its position and

align itself with the night sky automatically . StarSense AutoAlign's internal camera captures an

image of the sky, and then analyzes it to identify the stars in the image . Based on this information,

StarSense can determine the coordinates of the center of the image . After repeating this

process a few times, the system can create an accurate model of the night sky . Once alignment

is complete, you can select any celestial object in the hand control's database, and StarSense

will automatically center the object in your eyepiece .

WARNING

• Never look directly at the Sun with the naked eye or with a telescope (unless you have the proper solar

filter) . Permanent and irreversible eye damage may result .

• Never use your telescope to project an image of the Sun onto any surface . Internal heat build-up can

damage the telescope and any accessories attached to it .

• Never use an eyepiece solar filter or a Herschel Wedge . Internal heat build-up inside the telescope can

cause these devices to crack or break, allowing unfiltered sunlight to pass through to the eye .

• Do not leave the telescope unsupervised, especially when adults are unfamiliar with your telescope

or children are present .

WHAT'S IN THE BOX

StarSense Camera

StarSense Hand Control

Small Camera Bracket

Large Camera Bracket

& Large Bracket Base

(pre-installed on camera in box)

4mm Allen

Camera

2 Thumbscrews

Wrench

to Auxiliary

for Large Camera

Port Cable

Bracket