Hidrotermal Filtration Combo PC Series Gebruikershandleiding - Pagina 2

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Hidrotermal Filtration Combo PC Series. Hidrotermal Filtration Combo PC Series 7 pagina's.

1. Filter Parameters

Model
Filter Model
HT-PC350-6w HT-PG350
HT-PC450-6w HT-PG350
HT-PC350-6w HT-PG350
HT-PC500-6w HT-PG350
HT-PC650-6w HT-PG350
2. Function
The filter uses special filter sand to remove dirt particles from pool water. The filter sand is loaded into
the filter tank and functions as the permanent dirt removing media.The pool water, which contains
suspended dirt particles, is pumped through the piping system and is automatically directed by the
patented filter control valve to the top of the filter tank. As the pool water is pumped through the filter
sand, dirt particles are trapped by the sand bed, and filtered out. The cleaned Pool water is returned
from the bottom of the filter tank, through the control valve and back to the pool through the piping
system. This entire sequence is continuous and automatic and provides for total recirculation of pool
water through the filter and piping system.
After a period of time the accumulated dirt in the filter causes a resistance to flow, and the flow
diminishes and the reading of pressure gauge rises.This means it is time to clean your filter. With the
control valve in the BACKWASH position, the water flow is automatically reversed through the filter so
that it is directed to the bottom of the tank, up through the sand, flushing the previously trapped dirt
and debris out the waste line. Once the filter is backwashed of dirt,the control valve is manually
positioned to Rinse,and then positioned to filter to resume normal operation.
Pump Model
Valve Connection
Hidro-BPS050
1.5
Hidro-BPS050
1.5
Hidro-BPS050
1.5
Hidro-BPS075
1.5
Hidro-BPS100
1.5
Figure 1
0.5-0.8mm
Sand Weight
50mm
25
50mm
34
50mm
150
50mm
80
50mm
160
Flow
Design
Area
Flow
2
3
0.10m
4.5m
/h
2
3
0.13m
6.5m
/h
2
3
0.16m
8m
/h
2
3
0.23m
11.5m
/h
2
3
0.32m
16m
/h