Hidrotermal Hidro-SS Series Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Hidrotermal Hidro-SS Series. Hidrotermal Hidro-SS Series 15 pagina's.

1. Installation and Procedure

A) The steam generator should be installed in a dry, well ventilated location, and provided

adequate drainage. You can install the steam generator under a closet, attic, shelf, or basement.

And it must be locked without movement. Please See Figure1.

B) This series steam generator can be installed on the wall or on the floor, but the unit must be

level precisely. There are two mounting holes on the back of the generator, the screws must set

in with strong expansion bolts or equivalent supports.

C) The steam pipe should enter into the steam room and total length less than 6meter. and set it

at least 300mm above the floor or 150mm far away from the seat.

D) The generator should be mounted in a minimum 0.25m³ space.

E) The mounting location should minimize the number of bends and elbows in the steam lines.

F) Should not be install in the cold area or the place easy to ice up.

G) The steam spout, water inlet, and the drainer are installed on left, it can exchange the position

depend on the locale.

Please select the best mounting location under being satisfied to the above requirement.

Figure 1: Location of Installation