Celexon 4260094730160 Gebruiksaanwijzing - Pagina 6

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Celexon 4260094730160. Celexon 4260094730160 7 pagina's. Tripod screen

SETTING UP THE SCREEN

STEP 1:

Place the screen vertically on the tripod feet and

release the tensioning lever on the carrying handle.

STEP 2:

Hold the screen by the handle and lift the case

slightly while pulling the tripod feet downwards as

far apart as possible and place the screen on them.

For sizes over 200cm, 2 people are required to set

up the screen.

STEP 3:

Hold the screen by the carrying handle and rotate

the stand 90° so that the screen can be extended

upwards. Adjust the housing to the desired height

and tighten the tensioning lever. Do not release the

housing by the carrying handle until the tension lever

is tight.

STEP 4:

Loosen the tensioning nut, turn the stand hook forward

and carefully pull the cloth vertically upwards. Hang

the fabric on using the loop in the centre of the upper

bar.

STEP 5:

With one hand, grasp the back rod of the stand, with the other hand the

carrying handle and adjust the screen to the desired height. Then screw the

tensioning nut hand-tight again.

STEP 6:

The integrated keystone bracket is located at the

top of the stand rod. This can be used to correct for

angled projection if required.