Dynamic Projection MH13 Snelle installatiehandleiding - Pagina 9
Blader online of download pdf Snelle installatiehandleiding voor {categorie_naam} Dynamic Projection MH13. Dynamic Projection MH13 10 pagina's. Mirror head
Pagina afdrukken
Mirror Head Quick Installation Guide
For the full manual please visit
DMX fixture definition for v10021
Caution! Since 2022 all the Mirror Head units are leaving the factory with an entirely NEW GENERATION
OF FIRMWARE 10021. To download the manual for the new firmware 10021 and newer, please visit our Mirror
Head support page.
Channel
Function
#1
PAN Coase (High Byte)
#2
PAN Fine (Low Byte)
#3
TILT Coase (High Byte)
#4
TILT Fine (Low Byte)
#5
Mirror Reset
Power On Position SAVE
Power On Position LOAD
#6
Shutter when move ENABLED
Blank when move ENABLED
Shutter ON
Shutter OFF
Blank ON
Blank OFF
#7
FX Engine ENABLED
#8
TRACKING Mode ENABLED
VECTOR Mode ENABLED
In FX Mode PAN Frequency
https://www.dynamicprojection.com/mh-support/
https://www.dynamicprojection.com/mh-support/
Copyright © 2014 - 2022 Dynamic Projection Institute GmbH. All rights reserved. http://www.dynamicprojection.com
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
Value
Notes
0-255
In FX Mode: PAN Position
0-255
In FX Mode: PAN Amplitude
0-255
In FX Mode: TILT Position
0-255
In FX Mode: TILT Amplitude
255
Mirror calibration / Reset system
128-245
10-127
200-250
128-190
60-70
40-50
20-30
1-10
255
0
1-255
Value is the speed amount
0-255
In FX Mode PAN Frequency
9
QIG - Version 2.8