Celexon INF200 Bedieningshandleiding - Pagina 8

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Celexon INF200. Celexon INF200 10 pagina's. Inflatable outdoor screen
Ook voor Celexon INF200: Gebruiksaanwijzing (12 pagina's)

Pagina afdrukken

Disassembly

Step 1:

Turn off the electric pump, open the zipper of the frame and pull the screen back-

wards with two people.

The frame should then tilt backwards and the cloth surface should point upwards.

Step 2:

Disconnect the pump from the power source, then remove the air hose and the

pegs from the ground.

Place the pump and extension cord or cable drum aside. Remove all the pegs from

the ground and, if necessary, remove the tensioning straps from the frame. Carefully

set the pointed pegs aside.

Step 3:

Hold the frame with one person while the other loosens the cloth from the frame.

Pull only on the outer band of the cloth to loosen it right the way around.

Step 4:

Carefully fold the cloth together. Be careful to put it together in a dry state being

sure there are no objects, moisture, leaves or insects left inside. Otherwise, this could

permanently cause stains or even cracks in the cloth.

Fold the fabric at the as it arrived to keep kinks as low as possible. Do not fold the

cloth more than necessary to store it. Do not apply any pressure on the cloth during

storage so as to avoid kinking.

Step 5:

Fold the frame together and push the air towards the outlet. It is easier to leave the

frame for a short while after opening the outlet to allow the air to escape.

Step 6:

Pack away all parts as they are delivered. Always store the screen fabric at the top of

the package to ensure that no pressure is applied to it during storage. The pegs may

be stored separately to prevent possible damage to the material during storage or

transportation.