HIFEI Technology 160A-KIII Pro-HV Gebruiksaanwijzing - Pagina 6

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} HIFEI Technology 160A-KIII Pro-HV. HIFEI Technology 160A-KIII Pro-HV 10 pagina's.

Pagina afdrukken

HiFei Software V5.0 operation

HiFei software V5.0 is specially for easy programming King-

kong III & KIII Pro ESC. (Please download V5.0 from Hifei

official website www.hifei.com)

What can be realized by V5.0?

Fully program Kingkong III Pro (incl. heli mode)

Upgrade firmware of Kingkong III Pro

View logged data by Kingkong III Pro

Computer OS request

• PC with Windows XP/Vista/7 operation system

• CD-ROM drive (or access to Internet)

• Available USB port

• 8 Megabytes hard disk space

•Computer screen resolution with 800X600, 1024X768

(recommended) , 1280X1024

Hardware request

• Kingkong III ESC & KingKongIII Pro series ESC

• Hifei USB Linker (it's a necessary adaptor to connect

ESC to PC, purchase separately)

Install HiFei V5.0 to PC

Download the V5.0 setup software from Hifei website and

finish the installation according to the popped-up window

guide.

If PC is 64 or 32 bit, when V5.0 is completed installation,

It is requested to back to directory folder of HiFei V5.0 and

install driver of 64 or 32 bit by hand separately.

If PC OS is Windows 7, it is suggested to installed V5.0 to

any of other hard disks rather than 'C'. If PC has only 'C'

hard partition, please try flash disk.

If you once changed PC font to big size, then it needs to

change it to original size. Because big size font would possi-

bly cause software interface cannot be showed in full.

Connect ESC to PC

Step

: Plug the USB Adapter to miniUSB port of ESC.

: Plug the USB Adapter to an USB port of PC.

: Power on the ESC

Kingkong III Pro USER MANUALS

Upgrade/RPM

To Receiver

USB Linker

Step

Battery

V5.0 tab 1 Welcome

- Open HiFei V5.0 by double clicking on the shortcut icon.

- Click on ‟Open Device‟.

*(If connection is right and successful, Kingkong ESC model

will be displayed at the box below)

- It‟s ready to use V5.0 for more operation

V5.0 tab 2 Parameter setting

Click on tab 2 Parameter Setting to get into programming in-

terface, select the options you want to change by down arrow,

then click on Update to save the setting.

V5.0 tab 5 Upgrade

In tab 5, you can upgrade ESC‟s firmware if there is a new

firmware for the ESC be released.

When upgrade the ESC, it needs to connect the cable to receiver

with upgrade cable together. (Pls refer to the below diagram)

Each ESC has specific firmware and be different. You MUST

not mistake to upgrade ESC to a wrong firmware, otherwise

possibly result from ESC be damaged.

Step

: Plug the USB Adapter to miniUSB port of ESC.

: Plug the USB Adapter to an USB port of PC.

: Short upgrade/rpm cable with receiver lead.

: Power on the ESC.

www.hifei.com

Step

USB Linker

Step

Battery

Step

Page 6