Agrisan MH 8 Gebruikershandleiding en gebruiksaanwijzing - Pagina 9

Blader online of download pdf Gebruikershandleiding en gebruiksaanwijzing voor {categorie_naam} Agrisan MH 8. Agrisan MH 8 15 pagina's. Hand mill

Adjusting the degree of fineness

Coarse / fine adjustment is possible by using the knurled nut

and is locked by applying the wing nut.

Coarse Setting:

Loosen the wing nut, adjust the knurled nut in the anti-clockwise direction

until you have the desired setting. Then tighten the wing nut.

Fine Setting:

Loosen the wing nut, adjust the knurled nut (in the clockwise direction) until

desired grade is reached. Then tighten the wing nut.

The MH 8 grain mill can be continually adjusted and according to the adjust-

ment chosen, produces the results required.

Opening the milling chamber

The unity of the funnel and upper millstone is ﬁxed by the ﬁne adjustment

mechanism on the base part of the mill. The ﬁne adjustment is located on

the upper part of the mill. By unscrewing the ﬁne adjustment the funnel can

be lifted oﬀ.

Place the funnel unit onto the guide rod which is ﬁxed in the lower part of

the part of the appliance. Please refer to the drawing to see the order of the

components.

Please clean the stones before attaching the funnel unit.

If your grain was not dry enough for the chosen mill setting, the grain will

smear the millstones. A hard, but smooth layer will appear on the millstones.

Take a kitchen knife and scratch the layer from the millstones. Clean the

grooves in the millstones. In order to clean the millstones, it is usually only

necessary to process 1 or 2 hand-falls of rice or grain at a coarse setting. Any

adhesions can be easily and quickly removed.