8level IPEB-4MP-36-1 Snelle installatiehandleiding - Pagina 3
Blader online of download pdf Snelle installatiehandleiding voor {categorie_naam} 8level IPEB-4MP-36-1. 8level IPEB-4MP-36-1 4 pagina's.
Pagina afdrukken
QUICK INSTALLATION GUIDE FOR IP CAMERA
IP Camera
IPEB-4MP-36-1
Thank you for using our product. Please read this manual carefully before using it.
The manual applies to 8level IP cameras
WARNING!
The manufacturer reserves the right to change the parameters of the devices and the method of
operation without prior notice. Due to continuous modifications and improvements to the firmware,
some of the functions described in the following instructions may be slightly different in reality. The
author reserves the right to make changes to all or part of the information contained in this manual
without prior notice.
COPYRIGHT & TRADEMARKS
We reserve the right to change the product specification without notification.
registered trademark of 8level. No part of the manual may be reproduced, translated or processed in
any other form without permission from 8level NEXT LEVEL IN NETWORKING. All rights reserved.
Copyright © 2011 8level.
CE DECLARATION OF CONFORMITY
The product fulfills the following requirements according to:
EMC Directive 2014/30/UE
SAFETY NOTICE
Do not use this product near water (not applies to IP66 products)
and don't put into water. Do not place heavy objects on the casing.
RECYCLING NOTICE
The symbol of the crossed-out wheeled bin on this product means that it is forbidden to place
the equipment waste together with other waste (under penalty of fine). Detailed information
about recycling of the product can be obtained at local authorities, local waste treatment
plants or local distributors. Forwarding the equipment waste to recycling or recovery points
helps to avoid the negative influence of the harmful components present in the equipment on the
environment and human health; in this scope the primary role is played by each household.
SPECIFICATION
Camera
EN
Image Sensor
1/3" OV High-resolution CMOS Sensor
Main processor
HI3516C
Resolution
4MP
Effective Pixels
2688(H)*1520(V)
Compression
H.264/H.264+/H.265/H.265+/JPEG/AVI /MJPEG
TV System
PAL/NTSC
Auto: PAL 1/25-1/10000Sec; NTSC 1/25-1/10000Sec
Electronic Shutter Time
S/N Ratio
≥52dB
Progressive
Scanning System
Video Output
Network
Lens
Focal Length
3.6mm
Focus Control
Fixed
Lens Type
Fixed
Pixels
4MP
Night Vision
Infrared LED
14µ x 18PCS
20M
Infrared Distance
IR Status
Under 10 Lux By CDS
IR Power On
CDS Auto Control
Network
Ethernet
RJ-45 (10/100Base-T)
Protocol
TCP/IP,ICMP,HTTP,HTTPS,FTP,DHCP,DNS,DDNS,RTP,RTSP,RTCP,NTP,SMTP
ONVIF
Support ONVIF 2.4
YES, Support QR Code
P2P
POE
Support IEEE 802.3af
NO
WiFi
Video Delay
0.3S (Within the Lan)
Main Stream 1
2560*1440@20fps
Main Stream 2
2304*1296@30fps
Main Stream 3
1920*1080@30fps
Sub Stream 1
"720*480@20fps720*480@30fps"
Sub Stream 2
/
/
Sub Stream 3
Tri Stream
"352*288@20fps352*288@30fps"
IE8-11, Google Chrome, Firefox, Safari, Mac Safari
IE Brower
Smart Phone
iPhone, iPad, Android, Android Pad
Camera Features
Day/Night
Color/ B&W (IR-CUT )
Image Config
Saturation/Brightness/Contrast /Sharpness, Mirror, 3D NR , White Balance,
FLK(Flicker Control)
Corridor Pattern
Support
is a
Support
Defog Mode
BLC
Support
Support
WDR
Motion Detection
Support
Privacy Masking
3 Rectangular Zone
Recording Mode
NVR/NAS/CMS/Web
Language
Chinese Simplified, Chinese Traditional, English, Bulgarian, Polish, Farsi,
German, Russian, French, Korean, Portuguese, Japanese, Turkish, Spanish,
Hebrew, Italian,Nederlands
Interface
Audio
Optional
Alarm
/
SD Card Slot
YES
RS485
/
General
Housing
Metal , IP66
Anti-cut Bracket
No
IR Cut Filter
YES
-20°C ~ +60°C RH95% Max
Operation Temperature
Storage Temperature
-20°C ~ +60°C RH95% Max
Power Source
DC12V±10%, 850mA
Dimension
184(W) x 66(H) x 66(D)mm
Weight
700g
CONNECTING THE CAMERA TO THE NETWORK
To view the image from the IP camera over the LAN, use a PC working in the same subnet as the
camera (one address pool). Dedicated software used to search for cameras in the network and to
change its settings is the IP Search Tool (enclosed on CD). You can also use a web browser, because the
network camera has a built-in user interface through the browser.
The default IP address of the camera under which the camera is available is: http://192.168.1.168.
Default login and password: admin / admin
PC
WIFI
Router
NVR
Mouse
Diagram of connecting an IP camera using a PoE switch or a switch built into the Router.
DETECT THE CAMERA IN THE NETWORK AND CHANGE ITS IP ADDRESS
To access the IP camera, you need to know its IP address. This can be done using the IP Search Tool,
which will automatically find the device in the local LAN and display information about its current IP
address.
Select the device from the displayed list and change its IP address and subnet mask so that they are in
the same subnet as the PC.
3G
IPC
Switch with POE
IPC with POE