Celiera KFR-51GW/Ga Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Celiera KFR-51GW/Ga. Celiera KFR-51GW/Ga 14 pagina's. Split wall-mounted air conditioner

Pagina afdrukken

Air flow direction adjustment procedure

-(Adjusting up/down air flow direction )-

Up/down direction can be adjusted by using the OUT FLAP button on the remote controller. This button , each

time pressed , changes the mode in the following sequence:

-(2)

(3)

(4)

(5)

(AUTO)

Change to the OUT FLAP mode.

TO change the VANE CONTROL velocity press the FAN SPEED button.

Each time the button is pressed.fan speed is changed in sequence, from . [Lo]*i [Mid]«*l[Hi]

S)[AUTO].

To cool the whole room ,use the ,tt (HI) mode , (COOL MODE). If the sound of the air conditioner operating

disturbs your sleep ,use the SLEEP mode .

Recommended horizontal VANE range.

Use in the @ (AUTO) position usually.

Use positions ^—- (1) or ^ (2) in the

COOL or DRY mode and positions

/ (3) to I (5) in the HEAT mode

when adjusting to your requirements.

NOTE

• In the cooling operation ,when the air conditioner is operated with OUT FLAP blowing down (4) or (5) for 1 hour ,

the OUT FLAP direction is automatically set to level to prevent condensed water from dropping.

• Adjust the vertical OUT FLAP direction using the remote controller .If the horizontal vane are moved manually, it

may cause trouble.

• In heating operation , if the output air temperature is too low or when defrosting is done .the horizontal vane

position is set to (1).

(

Adjusting left/right air \_

flow direction

Horizontal & vertical auto swing.

Adjustlhe direction by remote controller.Press the IN FLAP button.the air swinging fins will constantly make the

left/right swinging or fixed direction in air delivery.