DBI SALA Flexiguard Gebruiksaanwijzing - Pagina 6

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} DBI SALA Flexiguard. DBI SALA Flexiguard 16 pagina's. Jib boom fall arrest system

Pagina afdrukken

WARNING:

This product is part of a Personal Fall Arrest and Work Positioning system. The user must follow the manufacturer's instructions

for each component of the system. These instructions must be provided to the user of this equipment. The user must read and understand

these instructions before using this equipment. Manufacturer's instructions must be followed for proper use and maintenance of this equipment.

Alterations or misuse of this product or failure to follow instructions may result in serious injury or death.

IMPORTANT:

If you have questions on the use, care, or suitability of this equipment for your application, contact Capital Safety. For general

questions, refer to national Standards including the ANSI Z359 (.0, .1, .2, .3, and .4) family of standards on fall protection, ANSI A10.32, and

applicable local, state, and federal (OSHA) requirements governing occupational safety for more information about fall protection systems.

IMPORTANT:

Prior to installation and use of this equipment, record the product identification information from the ID label in the

Inspection and Maintenance Log (Table 2) at the back of this manual.

PRODUCT DesCRIPTION:

Figure 1 illustrates Flexiguard

Rail Fall Arrest Systems that rotate 360° on various Counterweight Base options (A - E). The Counterweight Bases are configured

to allow transport of the system with a Crane, Hoist, or Forklift with a Lifting Strap/Chain. Jack Kits (F) and a Rescue Kit (G) are

also available.

Figure 2 illustrates components of the Jib Boom Fall Arrest System. See Table 1 for Component Specifications. The Hitch Ball Post

(F) is inserted into a sleeve in a Concrete Filled Counterweight Base (K) or Steel Counterweight Base (L). The Jib Rail Assembly

extends from the Upright Assembly (B) and supports a Glide Rail (C) with a Four Wheel Trolley (D) that travels in the rail halves.

The trolley is equipped with a 5/8" eye for connection of a Self-Retracting Lifeline or Energy Absorbing Lanyard. The Upright can

be rotated 360° with the foldable Rotation Handle (E) and locked at 11° increments or allowed to rotate through a range defined

by stop pins.The bottom of the Counterweight Base has Lifting Channels (H) and Lifting Eyes (G) for transport with a Forklift,

Pallet Jack, Crane, etc. Slope Indicators (I) determine the system is level. Optional Leveling Jacks (M) can be installed on the

Counterweight Bases. Some Jib Boom Fall Arrest System models include a Tagline Pulley System (O).

Component Specifications:

Figure 2

Reference

Component

Jib Rail Assembly

Upright Assembly

Glide Rail

Four Wheel Trolley

Rotation Handle

Hitch Ball Post

Lifting Eyes

Lifting Channels

Slope Indicator

Upright Assembly Locking Bolt

Concrete Filled Counterweight

Base

Steel Counterweight Base

Jack Kit - 8530563

Quantity 2 Kits Required

Tagline Pulley System

i-Safe™ RFID Tag

System Specifications:

Capacity:

1 Person per Glide Trolley with a combined weight (including clothing, tools, etc.) of no more than 310 lbs

(141 kg) or 420 lbs (191 kg) with a 900 lb (408 kg) MAAF device.

Anchorage:

Structure supporting the Fall Arrest System must withstand a 10,300 lb (47 kN) vertical load.

Jib Boom Fall Arrest Systems. The Adjustable Jib Booms are fixed height boom mounted Glide

Table 1 – Specifications

Materials

Aluminum

Tube - Steel

Lifting Connection Point - Steel

Aluminum Rail Halves

Wheels - Nylon

Bearings - Steel

5/8" Eye - Stainless Steel

Tube - Steel

Hand Grip - Rubber

Tube - Steel

Hitch Ball Pivot - Steel

Steel

Plastic Gauge on Aluminum

C-Channel

Steel

Steel Shell, Concrete with Steel

Rebar

Steel

Jack Kit - Steel

Mounting Tubes - Steel

Mounting Pin - Steel

Rope - Nylon Kermantle

Pulley - ???

Nylon, Glass

Rating

Connection Point - lifting only,

not for Fall Protection: 1,200

lbs (544 kg) Vertical (â) Load

1,800 lb (817 kg) Vertical (â)

Load

5,000 lb (2,268 kg) Vertical

(â) Load

5,000 lb (2,268 kg) Vertical

(â) Load (1,250 lbs per eye)

Filled with 4,000 psi Concrete

7,000 lb (3,175 kg) Top Wind

Jacks

Radio Frequency - 13.56 MHz

Assembly/Install

Instruction

5903390

5903386