DBK Drymatic Boost Bar FGPH106 Gebruiksaanwijzing - Pagina 6

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} DBK Drymatic Boost Bar FGPH106. DBK Drymatic Boost Bar FGPH106 18 pagina's. Adaptable heat drying system

Pagina afdrukken

Product Outline:

Touch Screen Display
Cord Clamp
Moulded Handle
*Only replace fuse with a 15A, 250/500V ceramic type fuse as marked on the unit. (DBK part number: EC308)

Storage and Transport

When finished with the machine the fixed mains cord can be wrapped around one of the inlets/
outlets and the plug can be clipped into cord retainer as shown. The cord can be wrapped in either
direction.
Units can be carried by the handle on the top allowing an operator to carry two at a time with ease.
Units can be stacked in pairs to form a 8 unit high tower (16 units in total ~1.6m)
Note: Units should not be operated when stacked and the cord should always be fully unwound when in
use. They should be fully secured when in transit to prevent causing harm or damage.
4 units stacked in pairs
(max 16 in this orientation)
Switch Plate with Fuse and
Power Switch
Two units stacked directly
(max in this orientation)
Firmware Update Port
Air Guides
5
4m Mains Cord can be
Wrapped Around
Mouth
Inlet/Outlet
Air Channels for Drying
Underneath
Maximum Stack of 16 Units