Galanz BC-50Q53F Gebruiksaanwijzing - Pagina 5

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Galanz BC-50Q53F. Galanz BC-50Q53F 6 pagina's.

Pagina afdrukken

2. Cleansers such as soap powder, abrasive cleaning powder, alkali

cleansers, chemical cloth, thinner, alcohol, acid petroleum

product and hot water should not be used to clean the refrigerator

as they may damage the painted cover and plastics.

3. Smear can age the interior plastic component, so wipe it as soon

as possible.

4. Please check the points below after maintenance:

(1) Is there any damage or loss of the electronic wire ?

(2) Can the plug be put in the socket reliably and smoothly?

(3)Is the plug heating unconventionally?

Warning: Please get rid of the gasket of the door before the

disposal. The disposed apparatus should be handled by

professional staff, as it may be harmful to the environment.

TROUBLE SHOOTING TIPS

1.The refrigerator does not work.

It may not be connected to the power supply(plug, power cut or fuse);

Voltage is too low.

2.The refrigerator does not work efficiently as expected.

It may be caused by heavy frost, or by warm temperature setting,or by

frequently door operating.

3.It makes unusual noise.

It may be caused by an imbalance or loose ground locating the appliance,

or by resonation between the appliance and other ambient objects.

4.The compressor keeps working for a long period.

The environment temperature may be too high. The doors may be opened

frequently or even they are left open. The temperature control knob

setting in (4-6) state may increase the working time of compressor

5.Disgusting odour happens.

Food with strong odour should be packed tightly before being put inside the

appliance. Please check whether there is any deteriorated item or

whether the liners are left dirty for a long time.

6.Water leaks from the bottom of the refrigerator.

The drain tube is jammed. Please use a proper tool to solve it.

7.Heavy frost occurs on the rear of the appliance

Putting humid or hot food into the appliance may cause this problem. Or

it may be caused by the heavy environment moisture.

4. It is better not place object on the top of appliance which is magnetic,

heavy, or be filled with water. Electronic components may not work steadily

if water gets inside. Do not store object which is costly or impressible

to temperature and , e.g. serum, bacterin and so on.

INSTRUCTIONS OF INSTALLATION

1.The refrigerator should be located in a completely flat surface , Leave 5~10

cm between each side of the appliance and the wall,

and leave 30 cm between the top of the appliance and

the ceiling .

2.Choose a location which is not exposed to sunlight ,

high temperature or humid , as humidity may

cause stain.

3.Pulled out the bottom panel before installation.

4.The appliance can be adjusted by rolling its two

legs in front the bottom when it is unstable. Rolling

in clockwise can rise up the machine.

5.The location should be firm and flat. An un-securely

position may cause noise and libration

(a)The noise may be increased if the

floor is not firm.

(b) Put a sheet under the appliance for solving the heat

emission if you need to locate it onto a carpet.

6.Make sure the adjustable legs are clung to the floor, and set the appliance

slope backward slightly for keeping the doors closed tightly.

INSTRUCTIONS OF OPERATING

PLACEMENT OF FOOD

1.There should always be some space between

items inside for air circulation.

2.Food should be kept in sealed package to avoid

becoming dry or with odour.

3.Hot food should be cooled down before placing

into the appliance. Otherwise, interior

temperature and electronic consumption

will increase.

4.Reduce the frequency of door opening can

efficiently low down the electronic consumption.

Warning:

Do not use any electronic equipment inside the appliance.