Dynamix 10/100/1000 (SFP) Gebruikershandleiding

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dynamix 10/100/1000 (SFP). Dynamix 10/100/1000 (SFP) 2 pagina's.

Pagina afdrukken

Application Diagram

Troubleshooting

Diagnosing Media Converter Indicators

Dynamix Media Converter can be easily

monitored through its comprehensive panel

indicators. These indicators assist in

identifying problems the Media Converter

may encounter. This section describes

common problems you may encounter and

possible solutions

1. Symptom: POWER indicator does not

light up (green) after power on.

Cause: Defective External power supply

Solution: Check the power plug by plugging

in another that is functioning properly. Check

the power cord with another device. If these

measures fail to resolve the problem, have

the unit power supply replaced by a qualified

distributor.

2. Symptom: Link indicator does not light up

(green) after making a connection.

Cause: Network interface (ex. a network adapter

card on the attached device), network cable, or

switch port is defective.

Solution: 2.1 Verify if both of the switch and

attached device are powered on.

2.2 Be sure the cable is plugged into both the

switch and corresponding device.

2.3 Verify that the proper cable type is used and its

length does not exceed specified limits.

2.4 Check the Adapter on the attached device and

cable connections for possible defects.

2.5 Replace the defective Adapter or cable if

necessary.

8. Compliance and Safety Information

FCC Warning

This equipment has been tested to comply with the

regulations for a Class A digital device, pursuant to

Part 15 of the FCC Rules.

These regulations are designed to provide

reasonable protection against harmful interference

when the equipment is operated in a

commercial environment. This equipment can

generate, use, and radiate radio frequency energy

and, if not installed and used in accordance with

the instruction manual, may cause harmful

interference to radio communications. Operation of

this equipment in a residential area is likely to

cause harmful interference in which case the user

will be required to correct the interference at

his/herown expense.

CE Mark Warning

This is a CE class A product. In a domestic

environment, this product may cause radio

interference in which case the user may be

required to take adequate measures.

www.godynamix.com

Dynamix 10/100/1000 (SFP)

Media Converter

User Manual

V. 1.2