ADENDORFF MAC AFRIC SWRENC-001 Originele gebruiksaanwijzing - Pagina 2
Blader online of download pdf Originele gebruiksaanwijzing voor {categorie_naam} ADENDORFF MAC AFRIC SWRENC-001. ADENDORFF MAC AFRIC SWRENC-001 11 pagina's.
Pagina afdrukken
GENERAL POWER TOOL SAFETY WARNINGS
(For All Power Tools)
WARNING! Read and understand all instructions.
instructions listed below may result in electric shock, fire and/or serious
personal injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Work Area Safety
1. Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
2. Do not operate power tools in explosive atmospheres, such as in the presence of
Power tools create sparks which may ignite the dust or
flammable liquids, gases, or dust.
fumes.
3. Keep children and bystanders away while operating a power tool.
you to lose control.
Electrical Safety
4. Power tool plugs must match the outlet. Never modify the plug in anyway. Do not use any
adapter plugs with earthed (grounded) power tools.
outlets will reduce risk of electric shock.
5. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges
and refrigerators.
There is an increased risk o electric shock if your body is earthed or
grounded.
6. Do not expose power tools to rain or wet conditions.
increase the risk of electric shock.
7. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp edges or moving parts.
cords increase the risk of electric shock.
8. When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Failure to follow all
Distractions can cause
Unmodified plugs and matching
Water entering a power tool will
Damaged or entangled
Use of a cord suitable for outdoor use reduces the risk of electric shock.
9. If operating a power in a damp location is unavoidable, use a residual current device (RCD)
Use of an RCD reduces the risk of electric shock.
protected supply.
Personal Safety
10. Stay alert, watch what you are doing and use common sense when operating a power tool.
Do not use a power tool while you are tired or under the influence of drugs, alcohol, or
A moment of inattention while operating power tools may result in serious
medication.
personal injury.
11. Use personal protective equipment. Always wear eye protection.
as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
12. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to
power source and /or battery pack, picking up or carrying the tool.
your finger on the switch or energising power tools that have the switch on invites
accidents.
13. Remove any adjusting key or wrench before turning the tool on.
attached to a rotating part of the power tool may result in personal injury.
14. Do not overreach. Keep proper footing and balance at all times.
the power tool in unexpected situations.
15. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing, and gloves
Loose clothes, jewellery or long hair can be caught in moving
away from moving parts.
parts.
Power Tool Use and Care
16. Do not force the power tool. Use the correct power tool for your application.
power tool will do the job better and safer at the rate for which it was designed.
17. If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used.
dust-related hazards.
18. Do not use tool if switch does not turn it on or off.
Protective equipment such
Carrying power tools with
A wrench or a key left
This enables better control of
The correct
Use of dust collection can reduce
Any power tool that cannot be