8x8 Inc Valcom V-9964 Handmatig

Blader online of download pdf Handmatig voor {categorie_naam} 8x8 Inc Valcom V-9964. 8x8 Inc Valcom V-9964 3 pagina's. Feedback eliminator

Valcom V-2001A with V-9964 Feedback Eliminator

Objective

Configuring a Valcom V-2001A with a Feedback Eliminator Valcom V-9964 for 8x8 services - still needs a Universal

Telephone Interface (UTI) like Valcom V-9970 for it to work. To configure only Valcom V-2001A without Feedback

Eliminator, please see article

Disclaimer: 8x8 is not Responsible for configuration or deployment of legacy 3rd party

Paging devices, please consult the Original Equipment Manufacturer for support. 8x8 X

Series does not support FXO 3rd party devices

Applies To

• Valcom V-2001A (Single Zone Page Control Unit)

• Valcom V-9964 (Digital Feedback Eliminator / Message Stacker)

• Valcom V-9970 (Universal Telephone Interface)

Procedure

1. Valcom V-9964 won't work on either FXS or FXO Mode, so a Universal Telephone Interface (UTI) like Valcom

V-9970 must be used. Setup: 8x8 Adapter > V-9970 > V-9964 > V-2001A.

2. To connect altogether Valcom V-9970, V-9964, and V-2001A, please see diagram:

https://support.8x8.com/devices-accessories/overhead-paging/valcom-v-2001a-with-feedback-eliminator-valcom-v-9964-confi...

Valcom V-2001A Overhead Paging System Configuration for 8x8 Services

Updated: Mon, 20 Nov 2023 17:52:29 GMT