ADENDORFF CM650 Bedieningshandleiding - Pagina 10

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} ADENDORFF CM650. ADENDORFF CM650 10 pagina's. Concrete mixer

ASSEMBLY OF THE CEMENT MIXER

This mixer is simple to assembly.

Please follow the following steps after you

have finished unpacking and checking.

STEP 1

Attach the two Wheels (part # 78) to the

Wheel Shaft (part # 71) with bolts and

nuts supplied. Please refer to Fig 1.

STEP 2

Attach the Wheel Shaft and Wheel assembly

to the main body by bolting part A and

B. PIs refer to Fig 1.

STEP 3

Attach the Leg (part # 67) to the front of

the Frame Assembly (part # 63) with 3 nuts.

Make sure the bolts in the leg align to the

holes in the end of Frame Assembly.

PIs refer to FIG 2 and FIG 3.

Remarks: Please make sure to tighten all

nuts with enough strength.

A shop crane may be needed during the

assembly.