909 LS1620 Gebruiksaanwijzing - Pagina 5
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} 909 LS1620. 909 LS1620 15 pagina's. 125w 50mm variable speed scroll saw with work light
Pagina afdrukken4) Power tool use and care
a) Do not force the power tool. Use the correct power
tool for your application.
do the job better and safer at the rate for which it was
designed.
b) Do not use the power tool if the switch does not turn
it on and off.
Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools.
Such preventive safety measures reduce
the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
before use.
Many accidents are caused by poorly
maintained power tools.
f ) Keep cutting tools sharp and clean.
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed.
Use of the power tool for operations different
from those intended could result in a hazardous situation.
h) This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge,
unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.
The correct power tool will
Properly
i) Children should be supervised to ensure that they do
not play with the appliance.
5) Service
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts.
will ensure that the safety of the power tool is maintained.
Additional safety rules for scroll saws
•
Do not alter or misuse the tool. These tools are precision
built. Any alteration or modification not specified is misuse
and may result in dangerous conditions.
•
For your own safety, do not operate your scroll saw until
it is completely assembled and installed according to the
instructions and until you have read and understood all of
the instructions.
•
Your scroll saw must be bolted securely to a stand or
work bench. In addition, if there is any tendency for the
scroll saw to tip over or move during certain operations,
such as cutting long, heavy boards, bolt your scroll saw
stand or workbench to the floor.
•
This scroll saw is intended for indoor use only.
•
To avoid being pulled into the blade, do not wear loose
fitting gloves, loose clothing, neck ties or jewellery. Tie
back long hair and roll long sleeves above elbows.
•
Do not cut pieces too small to hold by hand. When making
a small cutout always secure the workpiece to a scrap
piece of plywood with double sided tape. This way the work
is supported and your fingers are away from the blade.
•
Never turn your scroll saw on before clearing the
table of all objects (tools, scraps of wood, etc.) except
for the workpiece.
•
Avoid awkward hand positions where a sudden slip could
cause a hand to move into the blade.
•
Always adjust the drop foot to just clear the workpiece to
protect the operator, keep blade breakage to a minimum
and provide maximum support for the blade.
•
Always adjust blade tension correctly.
5
This